XinaBox, xBUS and xPDI breakout I2C Module, IX01

  • RS Stock No. 174-3707
  • Mfr. Part No. IX01
  • Manufacturer XinaBox
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

xChip Boards

xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.

xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.

xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.

Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs

xChips connect to each other using an xBus connector, available from RS 174-4977.

Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.

This xCHIP is a xBUS and xPDI breakout designed for breadboarding with other chipsets and I2C devices.

This xCHIP is a xBUS and xPDI breakout designed for breadboarding with other chipsets and I2C devices.

Product highlights
xBUS and xPDI breakout

Xinabox Modular Prototyping Boards

Specifications
Attribute Value
Interface Function I2C
Kit Classification Module
Kit Name XBUS and xPDI breakout
176 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 13.46
(exc. GST)
$ 14.81
(inc. GST)
units
Per unit
1 - 1
$13.46
2 - 4
$13.07
5 - 9
$12.56
10 - 24
$12.22
25 +
$12.06
Related Products
MCU to USB Host Controller VDIP Modules These ...
Description:
MCU to USB Host Controller VDIP Modules These modules are MCU to USB host controller development modules for the Vinculum VNC1L device They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access ...
VDRIVE2 MCU to USB Host Controller Development Module, ...
Description:
VDRIVE2 MCU to USB Host Controller Development Module, FTDI Chip The VDrive2 module provides an easy solution for adding a USB Flash disk interface to an existing product Only four signal lines plus 5V supply and ground are required to ...
USB 20 Hi-Speed Mini-Module, FTDI Chip The FT2232H ...
Description:
USB 20 Hi-Speed Mini-Module, FTDI Chip The FT2232H Mini-Module is a USB-to-Serial/FIFO unit that utilizes the FT2232H USB Hi-Speed 2-port bridge chip The FT4232H Mini-Module is a USB-to-Serial/MPSSE unit that utilizes the FT4232H USB Hi-Speed 4-port bridge chip The IC ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...