Power Integrations LNK304DN Link Switch, Off Line Switcher, 170mA 8-Pin, SOC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LNK304 LinkSwitch-TN Buck Converter

The Power Integrations LNK304 LinkSwitch™-TN device family are Buck Converter ICs that provide a low component count step down solution. The LNK304 has been designed to offer a higher performing alternative when compared to linear and passive component solutions.

Applications

The LNK304 LinkSwitch buck convertor is ideal for use in appliances and timers, and for LED drivers and industrial controls.

Features

Fully integrated auto-restart for short circuit and open loop fault protection
66 kHz operation with accurate current limit
Tight tolerances and negligible temperature variation
High breakdown voltage of 700 V
Frequency jittering dramatically reduces EMI (∼10 dB)
Built-in current limit and hysteretic thermal protection
High thermal shutdown temperature (+135 °C minimum)
Consumes typically only 50/80 mW in self-powered buck topology at 115/230 V ac input with no-load (opto feedback)
Consumes typically only 7/12 mW in flyback topology with external bias at 115/230 V ac input with no-load

Switching Voltage Regulators, Power Integrations

Specifications
Attribute Value
Power Switch Topology Low Side
Power Switch Type Off Line Switcher
Switch On Resistance 44.2Ω
Number of Outputs 1
Current 170mA
Mounting Type Surface Mount
Package Type SOC
Pin Count 8
Power Switch Features Energy Efficient, Lowest Component Count
Dimensions 4.9 x 3.9 x 1.5mm
Protection Features Short Circuit
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Series LNK304
1100 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Tube of 100)
$ 1.02
(exc. GST)
$ 1.12
(inc. GST)
units
Per unit
Per Tube*
100 - 100
$1.02
$102.00
200 - 200
$0.973
$97.30
300 +
$0.93
$93.00
*price indicative
Related Products
Link Switch-II, Power Integrations The Link Switch-II dramatically ...
Description:
Link Switch-II, Power Integrations The Link Switch-II dramatically simplifies low power CV/CC charger designs by eliminating an optocoupler and secondary control circuitry The device introduces a revolutionary control technique to provide very tight output voltage and current regulation, compensating for ...
e Fuses (Integrated FET), Texas Instruments e Fuses ...
Description:
e Fuses (Integrated FET), Texas Instruments e Fuses (electronic fuses) offer power supply rail protection solutions They add adjustable current limiting, overcurrent protection, overvoltage protection (OVP), reverse current protection, surge protection, output voltage clamping, adjustable slew rate control, under ...
Paddle Flow Switch Monitors liquid flow by means ...
Description:
Paddle Flow Switch Monitors liquid flow by means of a paddle A spring supported stainless steel paddle located in the flow chamber and moved by medium in the direction of flow. When a preset flow rate is approached, the magnet ...
The AUIPS7111S is a fully protected four terminal ...
Description:
The AUIPS7111S is a fully protected four terminal high side switch It features current sensing, over-current, over-temperature, ESD protection and drain to source active clamp. When the input voltage Vcc - Vin is higher than the specified threshold, the output ...