Fluke 1550C, Insulation Tester 1TΩ CAT III 1000 V, CAT IV 600 V

  • RS Stock No. 705-1957
  • Mfr. Part No. FLUKE 1550C
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Fluke 1550 C Insulation Resistance Tester

From Fluke, the 1550C insulation resistance tester offers digital insulation testing up to 5 kV. This means it is ideal for testing a wide range of high voltage equipment, such as switchgear, motors, generators and cables.

The Fluke 1550 C insulation tester can conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class and CAT IV 600 V safety rating. Featuring measurement storage and PC interface, the 1550C is the perfect tool for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur.

The 1550 model is supplied with an IP67 hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clips.

Features and Benefits

• Resistance Measurement: 200kΩ → 100 GΩ: ± 5%, 200GΩ → 1TΩ: ± 20%
• Test voltages to up 5 kV
• CAT III 1000 V, CAT IV 600 V safety rating
• Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
• Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 2 TΩ
• Timer settings up to 99 minutes for timed tests

Supplied with

Test cables & crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM, soft carrying case (Fluke 1555 only)

Fluke Insulation Resistance Tester

The Fluke 1T ohm insulation tester is a perfect tool for preventive or predictive maintenance programs. It is designed to identify potential equipment failures before they occur. Remote operation lets you spend as little time as possible in potentially hazardous zones. It is a high voltage insulation tester, ideal for testing high voltage equipment including switchgear, motors, generators and cables. The testing voltage ranges between 250V and 5000V. This device is Rechargeable Lead Acid (Yuasa NP2.8-12) battery-powered.

Supplied with test cables & crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM
Fluke 1550 & 1555 kits include IP67 hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clips.

Features and Benefits

• 99 measurements storage and recall and PC interface
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI)
• Capacitance and leakage current measurement
• Guard system eliminates the effect of surface leakage current on high resistance measurements
• Large LCD display with analogue bar graph
• Long life lead acid battery with over 750 tests between charges
• Ramp function for breakdown testing
• Timer settings up to 99 minutes for timed tests
• Voltage breakdown detection alerts and voltage reading up to 600VAC or DC for increased user safety

Certifications

• CAT III 1000V
• CAT IV 1000V
• CE certified
• CSA certified
• EN 61010 safety rating
• IEEE 43-2000
• IP40 rated

Specifications
Attribute Value
Tester Type Insulation Resistance Tester
Minimum Test Voltage 250V
Maximum Test Voltage 5000V
Maximum Insulation Resistance Measurement 1TΩ
Display Type LCD
Test Current 1 nA → 2 mA
Battery Life 750 Tests
Minimum Operating Temperature -20°C
Maximum Operating Temperature +50°C
Power Source Battery
Safety Category Level CAT III, CAT IV
Safety Category Voltage 600 V, 1000 V
Safety Category CAT III 1000 V, CAT IV 600 V
Length 277mm
Battery Type Rechargeable Lead Acid (Yuasa NP2.8-12)
Dimensions 277 x 269 x 160mm
Weight 3.7kg
Height 160mm
Model Number p 1550C
Width 269mm
Temporarily out of stock - back order for despatch 02/07/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 7,015.00
(exc. GST)
$ 7,716.50
(inc. GST)
units
Per unit
1 +
$7,015.00
Related Products
DET24C Earth Test Clamp DET24C is a clamp-on ...
Description:
DET24C Earth Test Clamp DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety The units are designed with flat core ends to prevent dirt build-up, ensuring measurement ...
Infrared (IR) Windows IR windows allow safe and ...
Description:
Infrared (IR) Windows IR windows allow safe and effective thermal imaging of fully energised electrical systems through closed panels and doors during routine electrical maintenance / inspection FLUKE IR windows The FLUKE IR window is arc flash resistant at 50 ...
Fluke 1650 Series Multifunction installation testers to verify ...
Description:
Fluke 1650 Series Multifunction installation testers to verify the safety of electrical installations in industrial, commercial and domestic applications Meet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulations Large illuminated display with exceptionally wide ...
500V Insulation and Continuity Tester Martindale IN2101 The ...
Description:
500V Insulation and Continuity Tester Martindale IN2101 The IN2101 is a compact, hand held electrical insulation tester which performs fast and accurate testing at 500 V with automatic discharge after test Manufactured from durable ABS, the IN2100 Series electrical insulation ...