Male C14 IEC Filter Snap-In,Rated At 10A,250 V ac

  • RS Stock No. 214-6170
  • Mfr. Part No. BZV03/A0620/05
  • Manufacturer Bulgin
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Double Fused (Vertical)

Depth behind panel including Fastons - 62.5mm

Note

214-6186 is Red, 214-6209 is Green and 214-6170 is non illuminated.

Standards

IEC/EN 60950

Approvals

UL recognised component, CSA certified, VDE, SEMKO

Approvals

UL Listed; CSA Certified; VDE; SEMKO

Panel Mount Switched IEC Power Inlet

A selection of general purpose switched IEC power inlet filters ranging from fused types to medical versions. They are available in single and double pole variants, with and without red or green neon illumination. The fused versions accept 5x20mm ceramic fuses.

Operating Frequency 50-400Hz
Max. attenuation (50Ω source / 50Ω load, common-mode / asymmetric) 6A: 56dB @ 40MHz, (6A:30dB @ 25MHz for Type 4 products)
Capacitors:
1.3nF between lines (class X)
2´2.2nF each line to earth (class Y)
Inductors: 0.7mH
Earth leakage current: 2´<0.35mA @ 250V 50Hz, (2´ <100μA @ 250V 50Hz for Type 4 products)
Connectors: IEC320 input, 6.3´ 0.8 Faston output
Operating temperature 40°C (de-rate linearly to 0A at 85°C)

Warning

  • Neutral line must not be fused where it is referenced to earth
Specifications
Attribute Value
Gender Male
Current Rating 10A
Voltage Rating 250 V ac
Mounting Type Snap-In
IEC Connector Type C14
Width 78.7mm
Depth 66.6mm
Height 36.1mm
On back order for despatch 17/02/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 57.28
(exc. GST)
$ 63.01
(inc. GST)
units
Per unit
1 - 9
$57.28
10 - 49
$55.84
50 - 99
$52.90
100 - 249
$51.34
250 +
$50.05
Related Products
Easy to installCompact designCost optimized constructionDegree of protection ...
Description:
Easy to installCompact designCost optimized constructionDegree of protection front side with power plug: IP 401)ENEC2)UL and cUL approval.
IEC Inlet plugs with integral mains filter. Designed ...
Description:
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724).,Accept 20 x 5mm dia. fuses. ...
IEC Inlet plugs with integral mains filter. Designed ...
Description:
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically stock no. 526-0724).,Low earth leakage current. IEC 950 Compliant. ...
Depth behind panel including Fastons - 62.5mm. ...
Description:
Depth behind panel including Fastons - 62.5mm.