Parker Hydraulic Level & Temperature Gauge S.690053

  • RS Stock No. 196-2735
  • Mfr. Part No. S.690053
  • Manufacturer Parker
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Level and Temperature Gauge

Designed to add style and efficiency to tank installations. These fluid level temperature gauges have a co-ordinated design with modular air breathers. The gauges are compatible with mineral and petroleum-based fluids due to their construction from high strength, aluminium free materials.

Features and Benefits

• High visibility one piece polyamide lens
• Universal front or rear fixing
• M10 and M12 bolt thread options
• 3 sizes with or without thermometer – 76 mm, 127 mm and 254 mm
• High impact polystyrene shroud
• For use on pressurised tanks up to 1 bar

Product and Application Information

Simple to install and designed for either front or rear fixing. After positioning the gauge, the bolts are tightened to provide a secure seal with no fear of leaking.

Supplied with

gasket

//media.rs-online.com/t_line/L331953-02.gif
//media.rs-online.com/t_line/LF196273-02.gif
//media.rs-online.com/t_line/LI196273-01.gif
Specifications
Attribute Value
Scale Length 76mm
Maximum Operating Pressure 1 bar
Minimum Operating Temperature -30°C
Maximum Operating Temperature +90°C
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 43.64
(exc. GST)
$ 48.00
(inc. GST)
units
Per unit
1 +
$43.64
Related Products
The pressure modules in the Fluke 750P Series ...
Description:
The pressure modules in the Fluke 750P Series enable gauge or differential or absolute pressure measurement with Fluke 750 and 740 series documenting process calibrators (DPCs) or with Fluke 725 and 726 multifunction process calibrators (MPCs) Modules can be selected ...
The Volkel Go ring gauge M4x07 is calibrated ...
Description:
The Volkel Go ring gauge M4x07 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel No-Go ring gauge M8x125 is calibrated ...
Description:
The Volkel No-Go ring gauge M8x125 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...
The Volkel Go No-Go plug gauge M14x2 is ...
Description:
The Volkel Go No-Go plug gauge M14x2 is calibrated at measurement laboratory using IAC thread scanners The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...