Parker Double CETOP Mounting Hydraulic Check Valve ZRE-AB02-D1

  • RS Stock No. 134-7051
  • Mfr. Part No. ZRE-AB02-D1
  • Manufacturer Parker
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CETOP 05 Pilot Operated Check Valves

A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows flow at the outlet. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).

• Mountable in any position • High flow capacity
• DIN 24340 A10/ ISO 4401 / NFPA D05 Mounting interface
• 1.2 bar opening pressure
• Pilot opening ratio (pilot to main) 1:6
• MTTF 150 years

Check Valves

These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Specifications
Attribute Value
Manufacturer Series ZRE
CETOP Mounting CETOP 5
Single/Double Double
Cracking Pressure 2bar
Maximum Operating Pressure 315 bar
Maximum Flow Rate 120L/min
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 1,184.44
(exc. GST)
$ 1,302.88
(inc. GST)
units
Per unit
1 +
$1,184.44
Related Products
Double union ends with plain bore for solvent ...
Description:
Double union ends with plain bore for solvent cement jointing. Vibration free even at high velocity.
The Filmaster® filling loop designed to allow sealed ...
Description:
The Filmaster® filling loop designed to allow sealed heating systems to be charged via a temporary mains supply connection. 1/8in. BSP test port on isolating double check valve15mm compression connectionsProtects against Class 3 contamination risksBall valve with lever for easy ...
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...