Assemtech 3-Wire Open Collector Hall Effect Sensor switching current 5.2 mA supply voltage 4.5 24 V dc

  • RS Stock No. 866-2619
  • Mfr. Part No. PGN-SP-001
  • Manufacturer Assemtech
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Digital Hall Effect Proximity Sensors

Digital hall effect proximity sensors in low-profile flange-mount housing. They are suitable for different applications such as door positioning sensing, flow sensing and pedal switches.

Reverse battery protection
Latches in presence of south pole magnet
Unlatches in presence of north pole magnet
Meets IEC529 IPX5 for water protection
Capable of many different operations

Specifications
Attribute Value
Output Type 3-Wire Open Collector
Body Style Block
Supply Voltage 4.5 24 V dc
Terminal Type Wire Lead
Maximum DC Voltage 24V
Switching Current 5.2 mA
Length 17.27mm
Width 21.72mm
Depth 3.3mm
Dimensions 17.27 x 21.72 x 3.3 mm
IP Rating IPX5
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Standards Met IEC 529
293 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 10.14
(exc. GST)
$ 11.15
(inc. GST)
units
Per unit
1 +
$10.14
Related Products
Rectangular ABS housing Open collector PNP + NPN ...
Description:
Rectangular ABS housing Open collector PNP + NPN Output Normally open contact with bounce free operationLED indication of alignment and diagnosis Specified magnet assembly must be used with this sensor Sealed to IP65Cable length 145mm Dimensions 32 x 24 x ...
TMM88 Series Dual-Axis Non-Contact Inclination Sensors Sick TMM88 ...
Description:
TMM88 Series Dual-Axis Non-Contact Inclination Sensors Sick TMM88 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity TMM88 two-dimensional sensors take measurements with an ...
LOHET IC’s Ceramic based, linear Hall-effect ratiometric devices ...
Description:
LOHET IC’s Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed Three-pin in-line PCB terminals, 0.1in spacing Laser trimmed thin and thick film resistors-40 to ...
Miniature Ratiometric Linear Hall Effect Sensors Hall effect ...
Description:
Miniature Ratiometric Linear Hall Effect Sensors Hall effect sensors with output proportional to supply voltage and the strength of the magnet field Single current sinking or current sourcing linear output Rail-to-rail operation provides more useable signal for higher accuracy Responds ...