Kubler Analogue Inclination Sensor switching current 40 mA supply voltage 10 30 V dc

  • RS Stock No. 179-7733
  • Mfr. Part No. 8.IN81.1711.121
  • Manufacturer Kubler
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

The inclinometers of the IN81 series allow measuring 2-dimensional inclinations in the range of ±85° or 1-dimensional inclinations up to 360°.With their high robustness, their high protection level and their wide temperature range from -40°C to +85°C, these devices are ideally suitable for outdoor use – e.g. for mobile automation applications.

Stable accuracy over a wide temperature range from -40°C up to +85°C.High shock resistance up to 100 g and vibration resistance up to 10 g.Versatile:Parameterizable filter.Measuring direction 1- or 2-dimensional.With 1 x M12 connector or 2 x M12-connector.Stacked installation possible for redundancy.

Specifications
Attribute Value
Output Type Analogue
Supply Voltage 10 30 V dc
Maximum DC Voltage 10 30V
Switching Current 40 mA
Switching Frequency 0.1 10 Hz
Length 80mm
Width 60mm
Depth 23mm
Dimensions 80 x 60 x 23 mm
Housing Material Aluminium
IP Rating IP67, IP69K
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Reverse Polarity Protection Yes
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 512.67
(exc. GST)
$ 563.94
(inc. GST)
units
Per unit
1 +
$512.67
Related Products
ABS housing Open collector PNP + NPN Output ...
Description:
ABS housing Open collector PNP + NPN Output Normally open contact with bounce free operationLED indication of alignment and diagnosis Specified magnet assembly must be used with this sensor Sealed to IP65Cable length 145mm Dimensions 32 x 24 x 10 ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed Three-pin in-line PCB terminals, 0.1in spacing Laser trimmed thin and thick film resistors-40 to 125°C operating ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targetsIdeal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...
Hall-effect sensor for detecting the proximity of a ...
Description:
Hall-effect sensor for detecting the proximity of a magnetic fieldThe magnetic field may be generated either by a permanent magnet or by an electromagnetic field.Robust aluminium threaded cylindrical housing that can be easily integrated into a tapped hole.Digital output with ...