Sick Analogue Inclination Sensor switching current 35 mA @ 24 V supply voltage 16 35 V dc

  • RS Stock No. 136-9178
  • Mfr. Part No. TMS88B-AKC360
  • Manufacturer Sick
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

TMS88 Series Single-Axis Non-Contact Inclination Sensors

Sick TMS88 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity. TMS88 single-axis sensors take measurements with an accuracy of up to +/- 0.02°. With the rugged and UV-resistant plastic housing, the TMS88 inclination sensors are also ideally suited to outdoor use.

Features and Benefits

Single-dimensional inclination sensor ±360° measuring range with configurable zero point
Fully encapsulated electronics
High-precision

Sick Inclination Sensors

Specifications
Attribute Value
Output Type Analogue
Body Style Block
Mounting Style Threaded Mount
Supply Voltage 16 35 V dc
Terminal Type 5-Pin M12 Male Connector
Maximum DC Voltage 35V
Detection Range 0 360 °
Switching Current 35 mA @ 24 V
Switching Frequency 80 Hz
Length 90mm
Width 58mm
Depth 30mm
Dimensions 90 x 58 x 30 mm
Maximum Operating Temperature +80°C
Housing Material Aluminium
IP Rating IP65, IP67
Short Circuit Overload Protection Yes
Standards Met EN 60068-2-27, EN 60068-2-6, EN 61326-1, EN ISO 13309, EN ISO 14982, IEC 60529
Minimum Operating Temperature -40°C
Response Time 265 ms
Reverse Polarity Protection Yes
On back order for despatch 29/01/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 535.50
(exc. GST)
$ 589.05
(inc. GST)
units
Per unit
1 +
$535.50
Related Products
AC / DC transformer with integrated signal preparation ...
Description:
AC / DC transformer with integrated signal preparation Measures currents with VFD and SCR wavelength Electrical isolation Actual output; voltage or current No excess losses Cable entry to 32 mm ØSimple installation
ABS housing Open collector PNP + NPN Output ...
Description:
ABS housing Open collector PNP + NPN Output Normally open contact with bounce free operationLED indication of alignment and diagnosis Specified magnet assembly must be used with this sensor Sealed to IP65Cable length 145mm Dimensions 32 x 24 x 10 ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed Three-pin in-line PCB terminals, 0.1in spacing Laser trimmed thin and thick film resistors-40 to 125°C operating ...
The Cherry GS1001 series of gear tooth sensors ...
Description:
The Cherry GS1001 series of gear tooth sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required Stainless steel housing High speed capability Immune to rotational alignment ...