TLE49663KHTSA1 Infineon,, Unipolar Hall Effect Sensor, 2.7 24 V, 6-Pin TSOP

  • RS Stock No. 827-5075
  • Mfr. Part No. TLE49663KHTSA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Unipolar
Mounting Type Surface Mount
Pin Count 6
Minimum Magnetic Sensor Release Point -0.8 mT
Maximum Magnetic Sensor Operating Point 4.2 mT
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Supply Voltage 24 V
Length 2.9mm
Width 1.6mm
Height 1mm
Dimensions 2.9 x 1.6 x 1mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type TSOP
Typical Magnetic Sensor Hysteresis 5 mT
1950 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 25)
$ 1.12
(exc. GST)
$ 1.23
(inc. GST)
units
Per unit
Per Pack*
25 - 25
$1.12
$28.00
50 - 100
$0.989
$24.725
125 - 225
$0.858
$21.45
250 - 475
$0.808
$20.20
500 +
$0.758
$18.95
*price indicative
Packaging Options:
Related Products
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
Description:
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger They are also short circuit protected open-drain output to sink up to 25 mA.A south pole ...