TLE49215UHALA1 Infineon,, Bipolar Hall Effect Sensor, 4.5 24 V, 4-Pin SSOP

  • RS Stock No. 823-5771
  • Mfr. Part No. TLE49215UHALA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 4
Minimum Magnetic Sensor Release Point 0 mT
Maximum Magnetic Sensor Operating Point 0 mT
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 24 V
Length 5.34mm
Width 1mm
Height 3.71mm
Dimensions 5.34 x 1 x 3.71mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SSOP
Typical Magnetic Sensor Hysteresis 1.5 mT
112 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 2)
$ 4.25
(exc. GST)
$ 4.67
(inc. GST)
units
Per unit
Per Pack*
2 - 18
$4.25
$8.50
20 - 38
$3.74
$7.48
40 - 98
$3.725
$7.45
100 - 498
$3.14
$6.28
500 +
$3.06
$6.12
*price indicative
Packaging Options:
Related Products
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
Description:
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger They are also short circuit protected open-drain output to sink up to 25 mA.A south pole ...
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity ...