A1101EUA-T Allegro Microsystems,, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Unipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 10 Gs
Maximum Magnetic Sensor Operating Point 160 Gs
Minimum Operating Supply Voltage 3.8 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type Ultra Mini SIP
Typical Magnetic Sensor Hysteresis 55 Gs
25 : Next working day (AU stock)
215 : 5 working days (Global stock)
Price (ex. GST) Each (In a Pack of 5)
$ 2.896
(exc. GST)
$ 3.186
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$2.896
$14.48
25 - 95
$2.026
$10.13
100 - 245
$1.592
$7.96
250 - 495
$1.56
$7.80
500 +
$1.34
$6.70
*price indicative
Packaging Options:
Related Products
BH1749NUC is a digital color sensor IC with ...
Description:
BH1749NUC is a digital color sensor IC with I²C bus interface This IC senses Red, Green, Blue (RGB) and Infrared and converts them to digital values. The high sensitivity, wide dynamic range and excellent Ircut characteristics make it possible for ...
Magnetoresistive circuits, single axis and double axis comprising ...
Description:
Magnetoresistive circuits, single axis and double axis comprising a Wheatstone bridge with 4 magneto resistive branches Create a compensation field to eliminate an unwanted field (offset+, offset-)Can be re-initialised in the event of drift Measure movement or angular or linear ...
The GF705 magnetic field sensor from Sensitec is ...
Description:
The GF705 magnetic field sensor from Sensitec is based on the GMR (Giant Magneto Resistive) effect They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity. With the GF705 sensor you are able to measure magnetic ...
Description:
The TLE5012B is a 360° angle sensor that detects the orientation of a magnetic field This is achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. Highly precise angle values are determined over ...