A1120EUA-T Allegro Microsystems,, Unipolar Hall Effect Sensor Switch, 3-Pin SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Unipolar switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Unipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 5 Gs
Maximum Magnetic Sensor Operating Point 50 Gs
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 10 Gs
35 : Next working day (AU stock)
1660 : 7 working days (Global stock)
Price (ex. GST) Each (In a Pack of 5)
$ 2.314
(exc. GST)
$ 2.545
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$2.314
$11.57
25 - 95
$2.186
$10.93
100 - 245
$1.862
$9.31
250 - 495
$1.572
$7.86
500 +
$1.444
$7.22
*price indicative
Packaging Options:
Related Products
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the ...
The ATS468 is a true zero-speed gear tooth ...
Description:
The ATS468 is a true zero-speed gear tooth sensor IC consisting of an optimized Hall IC and a permanent magnet pellet configuration in a single overmolded package The integrated circuit provides a manufacturer-friendly solution for digital gear tooth sensing applications. ...
50A to 200A Integrated Current Sensor ICs, Allegro ...
Description:
50A to 200A Integrated Current Sensor ICs, Allegro Micro Systems Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments3000 Vrms galvanic isolation Allegro ...
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, ...
Description:
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field Featuring a quiescent voltage output of 50% of the supply voltage ...