1CPS Cable Switch, Straight, 76m, NO/NC

  • RS Stock No. 820-3317
  • Mfr. Part No. 1CPSA1
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Honeywell 1CPS Cable Pull Safety Switches

The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.

The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.

For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.

Direct opening actions of normally closed contacts
Choice of 1NC/1NO, 2NC/2NO or 3NC/1NO, 4NC contact configurations
Typical 76 meter cable span
Single red high intensity LED status indicator light available (24 Vdc or 120 Vdc)
Die cast zinc housing
Both gold plated or silver plated contacts available
Optional hardware packs available
UL, CE, CSA, SIL 3 capable

Specifications
Attribute Value
Series 1CPS
Reset Button Yes
Normal State Configuration NO/NC
Mounting Orientation Straight
Maximum Rope Span 76m
Maximum Current 10 A
Maximum AC Voltage 600V
Maximum DC Voltage 250V
Housing Material Die Cast Zinc
Number of Cable Entries 1
Conduit Entry 1/2 inch NPT
Size of Cable Entries 1/2 inch NPT
Depth 62.2mm
Dimensions 172.72 x 99.06 x 62.2 mm
Minimum Operating Temperature -25°C
E-Stop Button No
Maximum Operating Temperature +80°C
Width 99.06mm
IP Rating IP67
Length 172.72mm
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 375.45
(exc. GST)
$ 412.99
(inc. GST)
units
Per unit
1 - 5
$375.45
6 - 14
$366.05
15 - 24
$350.50
25 +
$339.46
Related Products
These safety interlock switches are compact and use ...
Description:
These safety interlock switches are compact and use a light force, typical applications include door interlocks for copiers, printers, fax machines and other compact appliances. Constructed with dual restoration springs and double cut-off for safetyContact gap greater than 4mm conforming ...
Using a third common contact pin halves the ...
Description:
Using a third common contact pin halves the PCB area to maximise code setting on crowded PCB’s. They are also used widely for two state, pull up / pull down resistor setting. Large numerals and EIA colour coded sliders.Base and ...
Dual in line programme switches. 1 to 16 ...
Description:
Dual in line programme switches. 1 to 16 selectable s.p.s.t.1 to 8 selectable d.p.s.t or s.p.d.t.(PCB linked).Large numerals and EIA colour coded sliders which are recessed to prevent unintentional changes to the settings.Base and tape sealed for flow soldering and ...
The Schneider XCS-DMR coded magnetic safety switches are ...
Description:
The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. ...