XY2-CE Cable Switch, Left Side, 50m, NO/NC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Telemecanique Sensors Emergency Stop Rope Pull Switch

The Telemecanique Sensors XY2CJ series emergency stop rope pull switch has a 1NO/1NC contact configuration. It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC and the current rating of the switch is 3A and 270mA for AC and DC respectively. It is designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. This product is easy to install and offers a quick visual check of the switch status for machine restart. This switch has a rope span of 50m and the mounting orientation is to the left side.

Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.

Features and Benefits

Switches incorporate positive opening operation contacts with the tripping of the switch being made with positive action
Switch latches in the tripped position (N/C safety contact(s) open)
Function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 50m
Comes with a pilot light (direct supply)
Size of cable entry is PG13.5


EN/ISO 13850:2006
IP65 rated

Attribute Value
Range Preventa
Series XY2-CE
Reset Button Yes
Normal State Configuration NO/NC
Mounting Orientation Left Side
Maximum Rope Span 50m
Maximum Current 3 A ac, 270 mA dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Number of Cable Entries 1
Conduit Entry PG13.5
Size of Cable Entries PG13.5
Width 229mm
Length 142mm
Depth 105mm
Dimensions 142 x 229 x 105 mm
Minimum Operating Temperature -25°C
E-Stop Button No
Maximum Operating Temperature +70°C
IP Rating IP65
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
$ 946.45
(exc. GST)
$ 1,041.09
(inc. GST)
Per unit
1 - 2
3 - 4
5 +
Related Products
Bernstein SRM Safety Rope Pull Switches Even under ...
Bernstein SRM Safety Rope Pull Switches Even under extreme conditions, such as major temperature fluctuations, the SRM rope pull switch continues to work reliably Rope pull switch manufactured in accordance with DIN EN 60947-5-5 and DIN EN ISO 13850Protection class ...
Cable Pull System SR-U2Z 300 / 175 / ...
Cable Pull System SR-U2Z 300 / 175 / 100 Maximum system length: 75 m Switch function: 2 NC + 2 NO (standard)Built-in reset button Cable pull eyelet, low cost Visualisation of correct cable tension Meets EN418 and IEC947-5-5Protection class IP67 ...
The Telemecanique sensors XY2CE is 240VAC voltage wire ...
The Telemecanique sensors XY2CE is 240VAC voltage wire switch It has E-stop rope pull switch on right side-2NC+2NO with yellow pilot light, 230V-boot. • Contact operation slow break• Cover material is stainless steel• Housing material is Zamak• Maximum rope span ...
GWN Series, Grab Wire Designed to offer grabwire ...
GWN Series, Grab Wire Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines in various environments Typical applications: - conveyors, assembly lines, transfer lines, packaging machinery, process equipment Grabwire switches ...