GWN Cable Switch, Straight, 100m, 2NO/2NC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

GWN Series, Grab Wire

Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines in various environments
Typical applications: - conveyors, assembly lines, transfer lines, packaging machinery, process equipment
Grabwire switches are a convenient way of installing two-rope pull switches on a long rope run, with common wiring and two heads
When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate
If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit
100M max span, each side
Ingress protection to IP65 as standard
Sealed M20 cable entries
Safety and auxiliary contacts as standard 2N/C + 1N/O
To comply with BS 5304 switch units should be fitted at each end of the grabwire
To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements
Please order the appropriate kit for length for your installation from the RS Rope kits for grabwire switches
Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304

Note

Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757

//media.rs-online.com/t_line/L1987396-01.jpg
Specifications
Attribute Value
Series GWN
Reset Button Yes
Pole Configuration 4P
Normal State Configuration 2NO/2NC
Mounting Orientation Straight
Maximum Rope Span 100m
Maximum Current 6 A
Maximum AC Voltage 415V
Maximum DC Voltage 24V
Housing Material Stainless Steel
Conduit Entry M20
E-Stop Button No
Dimensions 209 x 94 x 107.5 mm
IP Rating IP65
Length 209mm
Width 94mm
Depth 107.5mm
On back order for despatch 08/10/2020, delivery within 7 working days from despatch date.
Price (ex. GST) Each
Was $760.58
$ 760.28
(exc. GST)
$ 836.31
(inc. GST)
units
Per unit
1 +
$760.28
Related Products
The Schmersal ZQ700 series rope pull-wire emergency stop ...
Description:
The Schmersal ZQ700 series rope pull-wire emergency stop switch has a 2NC contact configuration It has a thermoplastic housing and a straight mount orientation. This switch has a rope span of 10m and an electrical current rating of 4A at ...
The Telemecanique Sensors XY2-CH-series emergency stop rope pull ...
Description:
The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 2NC contact configuration It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC respectively and the current rating of the switch is 3A and 270mA for AC ...
PSEN Safety Rope Pull Switch The PSENrope from ...
Description:
PSEN Safety Rope Pull Switch The PSENrope from Pilz is a manually operated rope pull switch used to safely shut down functional processes that extend over a wide area, such as conveyors It provides maximum safety, as the emergency stop ...
IDEM Guardian Line GLS Standard Safety Rope Pull ...
Description:
IDEM Guardian Line GLS Standard Safety Rope Pull Switches The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending ...