XY2CE Grab Wire Switch with E-Stop, 70m, NC, NO

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MA
Product Details

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches

These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

Specifications
Attribute Value
Range Preventa XY2
Series XY2CE
Reset Button Yes
Pole Configuration DPST
Normal State Configuration NC, NO
Indicator Type Rope Tension
Maximum Rope Span 70m
Maximum Current 3 A ac, 270 mA dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Housing Material Stainless Steel (Cover), Zamak (Body)
Number of Cable Entries 3
Size of Cable Entries ISO M20, PG 13.5
Maximum Operating Temperature +70°C
IP Rating IP66
Standards Met CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508
Length 229mm
Dimensions 229 x 105 x 142 mm
E-Stop Button Yes
Width 105mm
Hazardous Area Certification ATEX
Depth 142mm
Minimum Operating Temperature -25°C
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 330.50
(exc. GST)
$ 363.55
(inc. GST)
units
Per unit
1 +
$330.50
Related Products
Professional range of Bernstein limit switches from the ...
Description:
Professional range of Bernstein limit switches from the F1 UN series. All models are made from aluminium diecast and are highly reliable and excellent quality. Cable entry: M20 x 1.5Protection rating IP65/67Aluminium diecast enclosureActuator: Foot lever.
Metal encapsulated housingAl protective coverProtection rating IP65Cable entry ...
Description:
Metal encapsulated housingAl protective coverProtection rating IP65Cable entry M20 x 1.5.
Professional range of Bernstein IP67 rated limit switches ...
Description:
Professional range of Bernstein IP67 rated limit switches from the F2 series. All models are made from aluminium diecast and are highly reliable and excellent quality. Cable entry: M20 x 1.5Protection rating IP67Screw connectionsContact Type: 1NC, 1NOAluminium diecast enclosureActuator: Foot ...
1. Operation of pedal up to pressure point:the ...
Description:
1. Operation of pedal up to pressure point:the work contact is closed and the work process is initiated.2. In an emergency situation, operate beyond the pressure point resistor:The work contact is stopped and locked and the work process is stopped. ...