Aim-TTi TF960 Frequency Counter 6GHz

  • RS Stock No. 768-3441
  • Mfr. Part No. TF960
  • Manufacturer Aim-TTi
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): GB
Product Details

Aim-TTi TF960 - 6GHz Universal Frequency Counter

The Aim-TTi TF960 is a 6GHz bench/portable universal counter with USB. It uses a high quality temperature-compensated internal frequency reference (TCXO) which has a low aging rate and is stable to within ±1ppm over the full temperature range. The instrument's short warm-up time enables accurate measurements to be made even under portable battery-powered conditions. An External Reference input is provided and changeover from the internal timebase is automatic when an external reference standard is connected. For frequency, period and frequency ratio functions, the TF960 uses a reciprocal counting technique to provide high resolution at all frequencies. Eight significant digits of answer are produced in a 1 second measurement time, nine digits in 10s and ten digits in 100s, with a granularity of less than 2 counts in the least significant digit.

Frequency, period, pulse width, frequency ratio, duty cycle and event counter modes
DC to 6000MHz range, 0.001mHz resolution
High impedance measurement up to 125 MHz
AC or DC coupling, 1M/50Ohm selection, polarity invert
Switchable attenuator, threshold control
Noise filter for low frequency measurements
Selectable measurement time; display hold function
Large 10 digit display with full range of annunciators
Internal rechargeable batteries for portable use
USB interface provides full remote control and readback

Aim-TTi Frequency Counter

The Aim-TTi frequency counter is a 6GHz, universal benchtop, portable instrument with the USB interface device. This frequency counter can measure frequency, period, pulse width, duty cycle and frequency ratio, as well as perform event counting. It has a USB interface that allows it to be remotely controlled using RS232 protocol via a computer’s USB port. It can also be charged through the USB interface. This frequency counter has 10digit resolution and pulse width resolution is 20ns.

Features and Benefits

• High impedance measurement up to 125MHz
• AC or DC coupling, 1M/50Ohms selection, polarity invert
• Switchable attenuator and threshold control
• Noise filter for low frequency measurements
• Selectable measurement time and display hold function
• Large 10-digit display with full range of annunciators
• Internal rechargeable batteries for portable use
• USB interface provides full remote control and read back

Applications


Data communication
• Embedded systems
• RF and microwaves
• Laboratories

Certifications


EN61010-1
• EN61326

Specifications
Attribute Value
Maximum Frequency 6GHz
Minimum Frequency 0.001 Hz
Resolution 10 Digit
Pulse Width Resolution 20ns
Attenuation 1:1, 5:1
Maximum Internal Counter 9999999999
Minimum Internal Counter 1
Maximum Input Voltage 30V
Input Impedance 1 MΩ, 50 Ω
Measurement Time 100s
Connector Type Type-N
Dimensions 260 x 235 x 88mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature +5°C
Height 88mm
Model Number p TF960
Weight 950g
Length 260mm
Width 235mm
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 833.70
(exc. GST)
$ 917.07
(inc. GST)
units
Per unit
1 +
$833.70
Related Products
The 74VHC4040FT is an advanced high speed CMOS ...
Description:
The 74VHC4040FT is an advanced high speed CMOS 14-STAGE BINARY COUNTER/DIVIDER fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. Setting CLR to high ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...
Universally applicable as tachometer, timer, shift-counter and batch-counter. ...
Description:
Universally applicable as tachometer, timer, shift-counter and batch-counter. • Simplified handling• Separate preset adjustment (signal 1, trail preset, range or limit value)• Versatile and easy to program• 4 keys to address presets, prescaler and separate totaliser• Clearly readable ...
Counter, tachometer, chronometer, multi-totaliser, batch counter, preselection totaliserMaximum ...
Description:
Counter, tachometer, chronometer, multi-totaliser, batch counter, preselection totaliserMaximum input frequency 40 KHzSimple parameter setting, configuration using text menusEasy modification of presetsScaling factor5 A changeover relay and solid state outputRemovable connectorsBacklit LCD display (orange): 2 ...