RS PRO Piston Inline Flow Switch, 0.1 L/min → 0.6 L/min,

  • RS Stock No. 510-0565
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.

High pressure and temperature capabilities
Scaled switch point setting
Low flow switching capabilities
Installation independent of position
Material Brass

Note

If used on air system, life expectancy of the unit is greatly reduced due to instantaneous pressure loss on the piston, which has no damping.

Specifications
Attribute Value
Media Monitored Liquid
Device Type Piston Inline
Minimum Flow Rate 0.1 L/min
Maximum Flow Rate 0.6 L/min
Supply Voltage 200 V ac
Pipe Diameter Range 1/4 in
Connection Type 1/4 BSP
Maximum Pressure 300bar
Material Brass
Maximum Media Temperature +100°C
Maximum Operating Temperature +120°C
Current Rating 1 A
5 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 368.60
(exc. GST)
$ 405.46
(inc. GST)
units
Per unit
1 +
$368.60
Related Products
The RS PRO vertical mounting float switch has ...
Description:
The RS PRO vertical mounting float switch has an output of NO/NC with a maximum switching voltage of 240VAC and switching current of 06A. It is made up of Polyphenylene Sulphide and has a gasket material of nitrile. The mounting ...
The RS PRO horizontal mounting float switch has ...
Description:
The RS PRO horizontal mounting float switch has an output of NO/NC with a maximum switching voltage of 240VAC and switching current of 06A. It is made up of polypropylene and has a gasket material of nitrile. The switch can ...
TSF Series Thermistor Float Switch Compact internal fitting ...
Description:
TSF Series Thermistor Float Switch Compact internal fitting design Reliable reed switch contacts Available in Nylon, Polypropylene or PPSWRAS approved Approvals WRAS Compact internal fitting design Reliable reed switch contacts Available in Nylon, Polypropylene or PPSWRAS approved.
Dual Position Stainless Steel Float Switch Designed to ...
Description:
Dual Position Stainless Steel Float Switch Designed to give the user a number of switching options to cater for a variety of system requirements These switches are most suited for use with aggressive liquids and hygienic applications. Two Independent Switching ...