Flow Switch Gems Sensors FS-550E

  • RS Stock No. 395-7224
  • Mfr. Part No. 020-3499
  • Manufacturer Gems Sensors
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

FS-550E Series Flow Switch

Standard FS-550E switches sense liquid flow in either direction to monitor flow/no flow conditions. The paddle is trimmed during installation to permit switch actuation at the desired flow rate. As flow increases, the paddle pivots to move out of the liquid path, producing less than 200 MB of pressure drop regardless of pipe size.

Features and Benefits

• Flow: 15.0 l/min - 125.0 l/min with preadjusted set points • Housing: Brass or stainless steel
• Minimum inline restriction; Paddle pivots to move out of liquid path with increasing flow
• Operating temperature: 150°C maximum

Product Application Information

• Compressors • Heat Exchangers
• Turbines
• Engine
• Boilers
• Chillers
• Valves
• Pumps
• Regulators

Specifications
Attribute Value
Media Monitored Liquid
Device Type Paddle
Minimum Flow Rate 15 L/min
Maximum Flow Rate 125 L/min
Supply Voltage 250 V
Pipe Diameter Range 1 in
Connection Type 1 BSP
Maximum Pressure 55bar
Material Stainless Steel
Minimum Operating Temperature -18°C
Maximum Operating Temperature +100°C
Series FS-550E
8 : Next working day (AU stock)
14 : 5 working days (Global stock)
Price (ex. GST) Each
$ 668.79
(exc. GST)
$ 735.67
(inc. GST)
units
Per unit
1 +
$668.79
Related Products
RotorFlow® in its most basic form — a ...
Description:
RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming ...
Gems™ Sensors popularised the RotorFlow® paddle wheel design ...
Description:
Gems™ Sensors popularised the RotorFlow® paddle wheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation and an unprecedented price/performance ratio. • ...
Gems™ hall effect turbine flow rate sensor is ...
Description:
Gems™ hall effect turbine flow rate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Turbine technology does not react to ...
Provides accurate flow detection in water and oil ...
Description:
Provides accurate flow detection in water and oil with 1% repeatability. Flow settings on the adjustable version can be easily changed without disassembly. A shuttle by-pass vane inside the housing is controlled externally using an ordinary flat-blade screwdriver. These switches ...