120W Fixed Installation Car Power Adapter, 11 → 32V dc / 300V dc

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Battery to 300Vdc Converter 120W - 3 Pin IEC Output Socket

The SM1760 provides a mains level DC output which is the most efficient means of supplying power to equipment employing switch mode type power conversion (most modern electric equipment).,To check compatibility: Measure the resistance between the live and the neutral pins of the equipments connector (with equipment mains switch in 'on' position). If the resistance is greater than 10KΩ (no mains transformer evident) the equipment should be compatible.

Wide input voltage range (11-32Vdc)
In line input connectors (supplied)
Shuttered IEC output socket
Ignition or remote on/off control by logic compatible input
Inbuilt RFI filter for low noise
High efficiency (84% typical)
High output surge rating
Output short circuit protection
Rugged metal case construction

Note

Suitable for negative earth battery systems only.,Not suitable for use with equipment employing a 50Hz mains transformer or AC motors.

Caution

The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For inside use only. Protect from moisture.

Battery to Mains Level DC Output

Specifications
Attribute Value
Input Voltage 11 → 32V dc
Output Voltage 300V dc
Output Power Continuous 120W
Output Power Intermittent 200W
Output Connection Type IEC Socket
Efficiency 84%
Output Current 400 mA, 600 mA
Length 147mm
Width 95mm
Depth 50mm
Weight 830g
Minimum Temperature -10°C
Maximum Temperature +30°C
Adapter Type Fixed Installation
Mounting Type Mounting Bracket
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 335.48
(exc. GST)
$ 369.03
(inc. GST)
units
Per unit
1 - 4
$335.48
5 - 9
$329.60
10 - 24
$323.53
25 - 49
$317.23
50 +
$311.68
Related Products
The new standard DA10-M series of plug-in wall-mount ...
Description:
The new standard DA10-M series of plug-in wall-mount AC-DC power adapters provide a very flexible power solution for instrumentation, telecommunications, computer peripheral and test and measurement systems This power plug has a 2-pin fixed blade AC plug for use in ...
138W & 440W Switch Mode, DC to DC ...
Description:
138W & 440W Switch Mode, DC to DC Battery Voltage Converters Robust switch mode battery voltage DC to DC converters for use when operating 12Vdc or 24Vdc equipment (communications, alarms, lighting, etc) from either a 12V or 24V battery system ...
27 W voltage converters 6 Vdc output voltage ...
Description:
27 W voltage converters 6 Vdc output voltage converters providing a perfectly regulated voltageIdeal for supplying onboard modules in vehicles.Surge and short-circuit protection. 6 Vdc output voltage converters providing a perfectly regulated voltage.Ideal for supplying onboard modules in vehicles.Surge and ...
Galvanic separation switch mode converter Switch mode converter ...
Description:
Galvanic separation switch mode converter Switch mode converter with independent input and output isolated from the chassisThis converter is essential within an automotive electronic system as it offsets the variations in output voltage from the battery caused by the load ...