E10 Indicator Light, Clear, 12 V, 250 mA, 3000h

  • RS Stock No. 104-862
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): KR
Product Details

T-3 (10mm) Tubular MES

Filament lamps will perform to specification and give optimum life when:
a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.
b) Ambient temperature is in the range 20°C to 25°C.
c) No mechanical vibration is present.
Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments (<80mA).
Power from a DC supply at the rated voltage can reduce the listed life by up to 50%.
The effect of deviation from the rated operating voltage should be noted:
5% above will reduce lamp life by up to 50%.
5% below will significantly increase lamp life.
Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Screw (LES, MES, SES)

Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.

Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).

Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.

Specifications
Attribute Value
Voltage Rating 12 V
Lamp Base E10
Current Rating 250 mA
Diameter 10mm
Lamp Size T3 1/4
Length 28 mm
Lens Colour Clear
Luminosity 12.5 lm
Life Hours 3000h
150 : Next working day (AU stock)
1580 : 5 working days (Global stock)
Price (ex. GST) Each (In a Pack of 10)
$ 2.345
(exc. GST)
$ 2.579
(inc. GST)
units
Per unit
Per Pack*
10 - 140
$2.345
$23.45
150 - 490
$2.114
$21.14
500 - 990
$2.086
$20.86
1000 - 4990
$2.035
$20.35
5000 +
$1.985
$19.85
*price indicative
Related Products
A very tough handlamp which floats 86mm dia. ...
Description:
A very tough handlamp which floats 86mm dia. biconvex lens provides a bright central spot beamUses a 4.8V xenon lampSupplied with a non-rechargeable 996 batteryRechargeable when used with the Unilite 996 NiMH battery and charger (Stock Numbers 340-2465 and 224-0957 ...
General purpose torch lamp. P13.5s prefocus baseSuper-high brightness ...
Description:
General purpose torch lamp. P13.5s prefocus baseSuper-high brightness alternative to vacuum, Krypton and Xenon types.
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...
A range of control devices with an IP65 ...
Description:
A range of control devices with an IP65 protection rating and conforming to IEC 947-5-1. Standard fixing aperture is 16mm. Behind panel depth (including terminals) is only 49mm. ,The devices can be butted together allowing a greater number of devices ...