Pepperl + Fuchs Glass Fibre Optic Sensor 300 mm, Push Pull Output, IP67, 10 → 30 V dc

  • RS Stock No. 510-3520
  • Mfr. Part No. VL18LL-M/40A/118/128
  • Manufacturer Pepperl + Fuchs
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

M18 Fibre Amplifier

Pepperl & Fuchs VL18LL series fibre optic sensors offer many advantages, in particular for picking up small parts or in positions difficult to access. Suitable for use in rough environmental conditions, such as high temperatures or explosive conditions.
Depending on the fibre optic connected, the optical properties correspond to a single-path light barrier or a reflection light barrier. Single-path systems have one fibre optic each for transmitter and receiver. For reflection systems, the light is guided in a single fibre optic through separate transmitter and receiver fibres.

Light/dark switch as potentiometer
Clearly arranged control panel
Protection class 2
Not sensitive to ambient light, even with switched energy saving lamps
Multiple device installation possible, no mutual interference
Flashing power on LED in case of short-circuit
M12 connector 4 pin

Specifications
Attribute Value
Detection Range 300 mm
Output Type Push Pull
Fibre Optic Type Glass
Response Time 1 ms
Light Source Red LED
Electrical Connection M12 4-Pin
Switching Frequency 500 Hz
IP Rating IP67
Housing Material Nickel Plated Brass
Supply Voltage 10 → 30 V dc
Length 78mm
Width 11.2mm
Minimum Operating Temperature -25°C
Depth 7.8mm
Dimensions 78 x 11.2 x 7.8 mm
Maximum Operating Temperature +70°C
105 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 173.35
(exc. GST)
$ 190.69
(inc. GST)
units
Per unit
1 - 4
$173.35
5 - 9
$169.00
10 +
$166.34
Related Products
The output can be operated either as a ...
Description:
The output can be operated either as a switching output or in IO-Link modeFully configurable via IO-Link v1.1. Electrical outputs can be configured as PNP/NPN/Push-pull, normally open or normally closedTimer functions can be set, such as switch-on and switch-off delayAdjustable ...
2-channel Amplifier reduces installation space by half. Downsized ...
Description:
2-channel Amplifier reduces installation space by half. Downsized Equipment and Control Panels. The new 2-ch fiber amplifier unit has two-unit functions in the dimensions of the general one-unit, contributing to downsizing your equipment and control panels.Performance with highly stable detection ...
RS branded optical fiber amplifiers with stability indicator. ...
Description:
RS branded optical fiber amplifiers with stability indicator. Sensing distance can be set by keyLight on/Dark on optionalOutput can be set, NO delay or OFF delay 100msGreen LED indicator shows the power statusRed LED indicator shows the output statusTransparent PC ...
The output can be operated either as a ...
Description:
The output can be operated either as a switching output or in IO-Link modeFully configurable via IO-Link v1.1. Electrical outputs can be configured as PNP/NPN/Push-pull, normally open or normally closedTimer functions can be set, such as switch-on and switch-off delayAdjustable ...