Petzl ASAP Rope Lock Aluminium, Nylon, Stainless Steel

  • RS Stock No. 136-3753
  • Mfr. Part No. B71ALU
  • Manufacturer Petzl
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Petzl ASAP® LOCK Mobile Locking Fall Arrester

Petzl ASAP® LOCK mobile fall arrestor complete with locking function and designed to manage manipulations during rope ascents. An integrated locking function allows you to immobilise the lock reducing the length of a fall. You can move freely along the rope with no manual assistance plus if there is a shock or sudden movement the all arrestor locks onto the rope. When passing intermediate anchors, the connection arm makes the system loss resistant. When used with an energy absorbing lanyard the ASAP LOCK allows you to work at a distance from the rope.

FEATURES and BENEFITS:

ASAP LOCK mobile fall arrestor Provides constant fall protection
Arrests fall, slides and uncontrolled descents
Works with vertical and angled rope
Locks to the rope even when grabbed during a fall
Integrated locking function
Can immobilise the arrestor reducing fall length
Prevents the rope being blown upwards in strong winds
Effective and easy to use
Moves up and down the rope with no manual assistance
Easy to install and remove at any point on the rope
Connection arm makes the system loss resistant when passing intermediate anchors
Use with an ASAP’SORBER energy absorbing lanyard enables working at a distance from the rope.

SPECIFICATIONS:

Made from Aluminium, Nylon and Stainless Steel Weight – 425 g

Standards

CE EN 353-2, CE EN 12841 type A, EAC

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specifications
Attribute Value
Product Type Rope Clamp
Material Aluminium, Nylon, Stainless Steel
7 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 413.10
(exc. GST)
$ 454.41
(inc. GST)
units
Per unit
1 +
$413.10
Related Products
Manufactured from 304 stainless steel Available in a ...
Description:
Manufactured from 304 stainless steel Available in a choice of 4 different grip lengths6mm max panel thicknessSupplied fully assembled ready for installationParticularly suitable for use in the food and transport industriesCam lead-in ensures compression of sealing gasket8mm Triangular Lock.
Designed to allow controlled access to a desired ...
Description:
Designed to allow controlled access to a desired area or building by use of a coded entry sequence. Mortice latchAuxiliary lock for all doorsNo power supply or wiring requiredIn excess of 5000 code combinations (dependant on number of keys utilised)Code ...
Petzl JAG System is a versatile and compact ...
Description:
Petzl JAG System is a versatile and compact haul kit. The kit is used for pickoffs a tensioning system and for making a releasable anchor due to the 4:1 mechanical advantage and efficiency. The sheaves have sealed ball bearings. The ...
SERVICES - ready for use fall arrest kit: ...
Description:
SERVICES - ready for use fall arrest kit: Harness with extensible "Riplight System II®" patented waves with positioning belt. 2 fall arrester anchorage points (back - front). 4 adjustable buckles. Positioning belt with thermoformed back closed with wide Velcro. 120° ...