Petzl Lanyard

  • RS Stock No. 122-5282
  • Mfr. Part No. L64YUM 80
  • Manufacturer Petzl
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Absorbica Y Double Lanyard MGO International Version

Absorbica-Y International version double lanyard including an integrated energy absorber. The integrated compact energy absorber gives continuous protection when passing intermediate anchors. The lanyard is available in an 80 cm or 150 cm version without connectors. Certified to European and United States standards the lanyard is available with a two MGO large opening connectors and a captive carabiner.

FEATURES and BENEFITS:

International Version double lanyard
Integrated compact energy absorber
Continuous protection when passing intermediate anchors
Absorbs energy when falling
80 cm or 150 cm versions (with or without connectors)
150 cm version has elasticated arms
Two MGO large opening connectors for connect to a metal structure
Captive steel carabiner
TRIACT LOCK auto locking system attaches to the harness
Abrasion resistant durable zippered fabric pouch protects the energy absorber

SPECIFICATIONS:

Connector MGO
Length with connector 115 cm
Max length of torn lanyard after fall 220 cm
Max clearance for fall factor 2 - 435 cm
Weight 2070 g

MATERIAL:

Polyester
Nylon
High modulus polyethylene
Aluminium

Standards

ANSI Z359.13 12 feet, ANSI Z359.12, CE EN 355, CE EN 354, CE EN 362

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specifications
Attribute Value
Equipment Type Lanyard
12 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 324.59
(exc. GST)
$ 357.05
(inc. GST)
units
Per unit
1 +
$324.59
Related Products
3 Stranded twisted rope with a screw type ...
Description:
3 Stranded twisted rope with a screw type carabiner is for use with a Cobra fall arrestor with an AJ501 carabiner. The rope has a large 14 mm surface area complete with identification thread and a wear indicator coloured yellow ...
Miller kernmantel forked restraint lanyard complete with one ...
Description:
Miller kernmantel forked restraint lanyard complete with one aluminium twist lock karabiner and two GO60 aluminium scaffold hooks. The kernmantel is a new design and made with a light green rope with black stripes. The colours making the rope visible ...
Miller Kernmantel edge shock absorbing lanyards includes a ...
Description:
Miller Kernmantel edge shock absorbing lanyards includes a steel twist lock with a GO55 steel scaffold hook karabiner. The lanyards are edge tested and are complete with quality ropes, light green with a black stripe increasing your visibility. Kernmantel ropes ...
SERVICES - ready for use fall arrest kit: ...
Description:
SERVICES - ready for use fall arrest kit: Harness with extensible "Riplight System II®" patented waves with positioning belt. 2 fall arrester anchorage points (back - front). 4 adjustable buckles. Positioning belt with thermoformed back closed with wide Velcro. 120° ...