Miller By Honeywell Lanyard

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SK
Product Details

PSS Restraint Titan Rope Lanyard 1 m MOB.PLATF

PSS PA 3 Titan restraint rope lanyard is 1 m long and comes equipped with 1 screwgate karabiner.

ROPE:

3 Strand polyamide rope
Breaking strength 2200 daN

CS20 CONNECTOR:

Steel
Opening 17 mm
Weight 0.165 kg
Dimensions 104 x 58 mm

SCAFF HOOK CONNECTOR:

Steel
Opening 50 mm
Weight 0.165 kg
Dimensions 218 x 115 mm

Temperature range -30°C to +50°C

Standards

EN 354

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specifications
Attribute Value
Equipment Type Lanyard
3 : Next working day (AU stock)
73 : 5 working days (Global stock)
Price (ex. GST) Each
$ 61.70
(exc. GST)
$ 67.87
(inc. GST)
units
Per unit
1 +
$61.70
Related Products
3 Stranded twisted rope with a screw type ...
Description:
3 Stranded twisted rope with a screw type carabiner is for use with a Cobra fall arrestor with an AJ501 carabiner. The rope has a large 14 mm surface area complete with identification thread and a wear indicator coloured yellow ...
Miller Kernmantel edge shock absorbing lanyards includes a ...
Description:
Miller Kernmantel edge shock absorbing lanyards includes a steel twist lock with a GO55 steel scaffold hook karabiner. The lanyards are edge tested and are complete with quality ropes, light green with a black stripe increasing your visibility. Kernmantel ropes ...
Am’D carabiner is D shaped and suited for ...
Description:
Am’D carabiner is D shaped and suited for descenders and positioning lanyards plus the design and keylock system allow for adjustments. The carabiner can be connected to a Captiv bar giving excellent position along a major axis reducing the risk ...
Dielectric fall arrest with energy dissipater in double ...
Description:
Dielectric fall arrest with energy dissipater in double elastic strap (Y). Thimble loops. Equipped with 1 carabiner AM010D + 2 hooks AM022D. Material insulates to 30kV. Straps: Polyester. Absorber: Polyester. Carabiner: Plastic.