RS PRO Surface ESD Tester

  • RS Stock No. 776-8318
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Analogue Surface Resistance Test Kit

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 10 ohms.

Analogue compliance verification surface resistance checker
Automatic test range voltage selection compliance verification required by EN 61340-5-1
Portable operation with 9 Volt battery
LED Illuminates when battery power is low

Supplied with

1 Analogue surface resistance meter, 1x 9V alkaline battery, 2 shielded test leads, 2x 2.27 kilograms electrodes, 1 plastic Carrying Case, 1 certificate of calibration

RS Pro Surface ESD Tester Description

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 105 ohms.

ESD protected area products should be tested:
A. Prior to installation to qualify for listing in user’s ESD control plan. Approved ESD materials (see product qualification EN-61340-5-1 Table 3 - EPA Requirements)
B. During initial installation
C. For periodic checks of installed products as part of EN-61340-5-1 Compliance Verification testing per Table 3 - EPA Requirements.

Contents

1 x Analogue Surface Resistance Meter
1 x 9V Alkaline Battery
2 x Shielded Test Leads
2 x 2.27 kilograms Electrodes
1 x Plastic Carrying Case
1 x Certificate of Calibration

Specifications

Accuracy: +/- 1/2 decade
Meter: 0.2 kg
Kit: 5.4 kg
Meter: 11.4cm L x 7.1cm W x 5.3cm H
Plastic Carrying Case: 24.1cm L x 30.5cm W x 8.9cm H
Power Supply: 9V alkaline battery

Specifications
Attribute Value
Equipment Type Analogue Surface Resistance Test Kit
Power Source Battery
Test Point Surface
Supply Voltage 9V
Depth 241mm
Height 89mm
Display Type Analogue
Width 305mm
Complies with EN 61340-5-1 Yes
4 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 1,307.03
(exc. GST)
$ 1,437.73
(inc. GST)
units
Per unit
1 +
$1,307.03
Related Products
Thyristor and Triac Analyser The Atlas SCR will ...
Description:
Thyristor and Triac Analyser The Atlas SCR will identify the device type, display the pinout and measure gate sensitivity Connect any way round Thyristor and Triac identification Automatic pinout identification Gate sensitivity checking from 100uA to 90mALoad current test up ...
Workbench Tools ESD Harnessing Wire Threader Tool Manufactured ...
Description:
Workbench Tools ESD Harnessing Wire Threader Tool Manufactured in 300 Series stainless steel Bright orange PVC cover provides a soft slip resistant grip Printed with MENDA nomenclature and part number Tool designed specifically for threading wires into an already-tied harness ...
Personal Static Checker Ideal for checking the static ...
Description:
Personal Static Checker Ideal for checking the static on personnel Wrist strap and cords checkers Great for training demonstrations Wall mounted, plate available separatelyLED display shows readings of up to ±5000 Volts Low battery indicator Includes instructions and earth lead ...
Combo Wrist-strap & Footwear Tester 3-state touch tester ...
Description:
Combo Wrist-strap & Footwear Tester 3-state touch tester designed for fast, frequent testing of ESD personnel grounding devices Incorporates unique dual test circuit design which improves accuracy and eliminates need for separate wrist strap and foot grounder test units Equipped ...