Schneider Electric LU9MRC Connector

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CZ
Product Details

Coil Connector

Used with Power Bases in pre-wired applications
This type of connection must be used for a reversing starter using an LUM6M reverser block for separate mounting
Fits into the lower area of a Power base
Allows insertion of emergency stop control or voltage interface

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed
Quicker panel build with faster assembly time and fewer wires per starter
Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
Flexible and upgradeable with plug-and-play function modules
Voltage and protection parameters can be determined after assembly and wiring
Broad band electronic control unit provides improved overload protection with fewer components
Expandable plug-and–play diagnostics
Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Warning

  • Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.
Specifications
Attribute Value
Accessory Type Connector
For Use With Motor
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 94.15
(exc. GST)
$ 103.57
(inc. GST)
units
Per unit
1 - 4
$94.15
5 - 9
$89.45
10 - 19
$86.96
20 - 29
$81.84
30 +
$76.35
Related Products
For controlling, displaying current values, adjusting or configuring ...
Description:
For controlling, displaying current values, adjusting or configuring drives Schneider Electric presents the VW3 A1 a compact user-friendly display terminal that is easy to use. A large number of the Altivar range are compatible with this accessory, including; Altivar 312, ...
Frequency controllers for three-phase squirrel-cage motors 0.75 to ...
Description:
Frequency controllers for three-phase squirrel-cage motors 0.75 to 5.5kWProtection index IP21 and IP41 for the upper partEnables drive control of three-phase squirrel-cage motors with three-phase power supplyOutput control frequency: 0.5 to 200HzIncorporates 3 logic inputs, 2 analogue inputs, 2 logic ...
The Powersuite software workshop for PC is for ...
Description:
The Powersuite software workshop for PC is for commissioning starters and variable speed drive controllers.It is used for the preparation, programming, commissioning and maintenance phases.Able to configure Altistart range starters and all the Altivar range controllers.Microsoft Windows® environment.
The Lexium 05 servo drives and motors are ...
Description:
The Lexium 05 servo drives and motors are suitable for a wide range of positioning and precision speed control applications including, printing, packaging, labelling and materials handling.,The drives may be connected to any 3rd party motion controller with analogue, Fieldbus ...