Portescap Gearbox

  • RS Stock No. 718-953
  • Mfr. Part No. ADAPTOR KIT C
  • Manufacturer Portescap
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Accessories

//media.rs-online.com/t_line/L715016-01.gif
//media.rs-online.com/t_line/L715128-01.gif
//media.rs-online.com/t_line/LD718852-02.gif
//media.rs-online.com/t_line/LI718852-01.gif

Contents

4x M4x6 panhead screws; 4x M4x8 panhead screws; 4x M4 flat washers; 1x 6mm bore pinion; 1x 6.35mm bore pinion. Note: Loctite adhesive (stock no. 693-854 ) will be required to secure pinion to motor shaft.

AC Synchronous Motors

These synchronous motors are for direct driving from an a.c. supply. Ideally suited for time driving in instrumentation, machine and process control. The smaller units can be directly connected to the synchronous gearboxes (typical stock no. 332-868 etc).

Specifications
Attribute Value
Accessory Type Gearbox
For Use With Motor
10 : Next working day (AU stock)
31 : 5 working days (Global stock)
Price (ex. GST) Each
$ 18.22
(exc. GST)
$ 20.04
(inc. GST)
units
Per unit
1 +
$18.22
Related Products
Motors can be connected to our range of ...
Description:
Motors can be connected to our range of ovoid, spur or planetary gearboxes to increase output torque and lower speed Low mechanical inertia Low electrical and iron losses Negligible cogging Lack of any preferred armature position Precious metal alloy brush ...
This unit provides a continuous output power rating ...
Description:
This unit provides a continuous output power rating up to 60W, with precise servo control of dc servo motors It operates from a single rail supply which enables battery operation if required. A MOSFET based linear output stage provides a ...
The kit enables encoders to be fitted to ...
Description:
The kit enables encoders to be fitted to various motors, which require the use of a encoder The kit includes sleeves to fit shafts with diameters of 4mm, 6mm and 635mm (1/4inch) which allows hollow shaft encoders to be used. ...
The I/O breakout box features screw terminals to ...
Description:
The I/O breakout box features screw terminals to enable the 16 digital I/O (8 input/8output) to be easily connected,The unit is DIN-rail mounted and can be sited next to a typical PLC control unit.