ABB, Red/Yellow/Grey, Twist to Reset 37mm Round Head Emergency Button

  • RS Stock No. 521-3633
  • Mfr. Part No. 1TVL101000P3204
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CZ
Product Details

Emergency Stop Control Stations

Choosing the right Emergency Stop Device is vital in order to increase the safety for operators and equipment.
This range is suitable for indoor and outdoor use. The protection standards falls under IP65 with metric conduit entries.
IP65 is rated as ’’dust tight’’ and protects against water projected from a nozzle.
The Head Emergency Buttons can be used in the following areas:
•Food and Beverage
•Pharmaceutical Industry
•Rail and Transport Industry
•Automotive Industry
•Mining and Quarrying Industry
•Factory Automation Industry

Standards

IEC 60947-5-1, IEC 60947-5-5

This 1TVL101000P3204 is a control station that is supplied complete with actuator, contact blocks and legend plate.
These emergency stop buttons complies with EN418 regulations completely, which gives full confident for customers worldwide.

Frequently asked questions & answers

What is the different between a push button switch for an emergency stop and a general-purpose push button switch? A general-purpose push button switch is used for controls, e.g. to start machine operation or simply to switch modes. An emergency stop push button switch however, is mainly used as a safety measure to stop hazardous events.

Standards

IEC 60947-5-5

ABB

Robustly constructed, suitable for indoor or outdoor use
Ingress protection to IP65 with metric conduit entries
Supplied with contact block, additional contact blocks can be fitted
Emergency stop complies with EN418

Specifications
Attribute Value
Mounting Type Surface Mount
Reset Method Twist to Reset
Normal State Configuration NC
Auxiliary Contacts No
Pole and Throw Configuration SPST
IP Rating IP66
Head Style Round
Illuminated No
Head Diameter 37mm
Length 75mm
Colour Red/Yellow/Grey
Housing Material Thermoplastic
Width 101mm
Depth 107mm
Dimensions 75 x 101 x 107 mm
Push Button Material Plastic
28 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 125.26
(exc. GST)
$ 137.79
(inc. GST)
units
Per unit
1 +
$125.26
Related Products
The Siemens SIRIUS ACT enclosure for command device ...
Description:
The Siemens SIRIUS ACT enclosure for command device button has a 22mm mount diameter with a round red body The palm switch actuating element is made from a plastic material. It has a control point in the centre. It has ...
The EAO 84 series emergency stop pushbutton has ...
Description:
The EAO 84 series emergency stop pushbutton has a red round style head with the diameter of 32mm It has a two-pole contact configuration. The housing is made of plastic material. This pushbutton has a contact current rating of 5A ...
The compact 225 mm Series 84 is especially ...
Description:
The compact 225 mm Series 84 is especially suited for:Flush design Raised designPCB mounting The extremely small mounting depth makes this series highly suited for installation in flat, narrow casings. In combination with PCB fitting, Series 84 offers optional HALO ...
AO1 Series Switches - 16mm Operators Modular construction ...
Description:
AO1 Series Switches - 16mm Operators Modular construction illuminated and non illuminated Pushbutton, Keylock, Rotary and Emergency Stop switches to fit industry standard 16mm diameter cut-outs Round, square and rectangular operators can be fitted to single, double, three and four ...