Megger MFT1825 Electrical Tester

  • RS Stock No. 901-1330
  • Mfr. Part No. MFT1825-AU
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MFT1825 Multifunction Tester (AU Version)

The MFT1825 Multifunction Tester (AU Version) is designed for testing low voltage electrical installations to IEC 60364. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The MFT1825 brings Type B RCD testing, 3-pole earth electrode testing with attached rod technique and stakeless testing to a downloading and rechargeable instrument.

Simple colour-coded test selection and large clear backlit display for ease of use
Two and three wire non-trip loop testing for RCD protected circuits
Internal memory and Bluetooth® communications
Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
3-terminal earth test and stakeless testing for spike resistance measurement
EN61010 CATIV safety ratings and tough IP54 case

Supplied with

MFT1825 Multifunction Tester, Switched probe SP5, Neck strap - Megger embroidered, 3 Wire lead set with prods and clips, AU/NZ plug test lead and AC battery charger.

Specifications
Attribute Value
Loop Impedance Test Type 2 Wire, 3 Wire
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 1000V
Maximum Voltage Measurement 600V
Test Type Continuity, RCD
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type Europe Mains
Continuity Test Current 205 mA @ 0 → 2 Ω
RCD Test Type AC, B
Test Standards IEC 60364
Battery Type Rechargeable
Maximum Operating Temperature +55°C
Safety Category CAT III 600 V, CAT V 300 V
Display Type Backlight
Plug Type Australia, New Zealand
Safety Category Voltage 300 V, 600 V
Maximum Continuity Resistance 99.9kΩ
Safety Category Level CAT III, CAT V
Weight 1 (with Battery)kg
Model Number p MFT1825
Height 85mm
Minimum Operating Temperature -10°C
IP Rating IP54
Minimum Continuity Resistance 0.01Ω
Dimensions 235 x 150 x 85mm
Length 235mm
Power Source Battery
Width 150mm
Temporarily out of stock - back order for despatch 14/10/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 2,472.00
(exc. GST)
$ 2,719.20
(inc. GST)
units
Per unit
1 +
$2,472.00
Related Products
Megger MIT480 mk2 Series Insulation & Continuity Testers ...
Description:
Megger MIT480 mk2 Series Insulation & Continuity Testers MIT480 mk2 Series insulation & continuity testers replace the original MIT480 range Designed for the Telecommunication and Cable testing markets. The tester features a redesigned case, back-stand and 6 cell battery compartment ...
RS Pro IIT1500 Insulation Tester Our RS Pro ...
Description:
RS Pro IIT1500 Insulation Tester Our RS Pro insulation testers are a must-have to any electrician’s kit They have multiple features that make them powerful tools. This insulation meter is compact, very robust and features a shockproof housing to ensure ...
The Fluke 2G ohm insulation multimeter is a ...
Description:
The Fluke 2G ohm insulation multimeter is a single, compact and handheld unit It combines a digital insulation tester with a fully-featured, true RMS digital multimeter that provides maximum versatility for both, troubleshooting and preventative maintenance. This device helps in ...
The Megger 999 Mohm, 200mA insulation and continuity ...
Description:
The Megger 999 Mohm, 200mA insulation and continuity tester is not only durable and easy to use but also incorporates a comprehensive set of features designed to ensure operator safety, even under conditions of accidental misuse It includes automatic discharge ...