RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.

RS PRO Dual Link DVI-I to DVI-I Cable, Male to Male, 2m

9 In stock for delivery within 7 working day(s)
Add to Basket

Price (ex. GST) Each


(exc. GST)


(inc. GST)



RS Stock No.:
COO (Country of Origin):
unitsPer unit
1 +$28.10

The RS PRO 2 metre male to male DVI-I cable which has a black PVC jack and an outer diameter of 9.5mm. The connectors have a gold flash covering to prevent corrosion. There are three different types of DVI cables which all share a common connector, DVI-A(analogue), DVI-D(digital) and DVI-I(integrated). DVI-A only carries an analogue signal so this normally comes with a VGA connector on one end. DVI-D is a digital only connection and cannot be used with a VGA monitor unless it is actively converted to an analogue signal. DVI-I can carry either digital or analogue signal, the graphics cards controls the signal type. DVI-D and DVI-I are also split into two types of cable, dual link and single link. Dual link has all the pins connected to achieve higher resolutions whereas single link may have the physical pins present but some will not be connected inside the cable.

Cable TypeDual Link DVI-I to DVI-I
Connector A GenderMale
Connector A TypeDVI-I
Connector B GenderMale
Connector B TypeDVI-I
Outer Sheath MaterialPVC
Sheath ColourBlack
Size of Strands28 AWG, 30 AWG