Eaton 7.5 kW Automatic DOL Starter, 110 V ac, 3 Phase, IP55

  • RS Stock No. 535-2126
  • Mfr. Part No. SDAINLM16(110V50HZ120V60HZ)
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Star Delta - Open Chassis

Open chassis Star Delta starter for use within customised enclosures, enabling quick and easy installation and direct mounting onto 35mm DIN rail.,Manufactured using readily available Moeller components which conform to the latest IEC 947 standards and pre-wired to accept the Moeller Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4.,Star Delta Open Chassis starters comprise of a Main, Delta and Star contactors, Star Delta timer (adjustable between 0 and 30 seconds) and circuit diagram.

Overload relay is not supplied and must be ordered separately
Manufacturer part numbers beginning with SDAINL00AM, 0M, 0AM, 1M, M12, M16, M22 use ZB12 overloads (typical example stock no. 493-1239)
Manufacturer part numbers beginning with SDAINLM30, M45 and M55 use ZB32 overloads (typical example stock no. 493-1245)
Terminal protection to IP20
Operating temperature range -25 to +40°C
7.5kW (SDAINL00AM) = H77 x W162 x D112mm
12.5kW & 18.5kW (SDAINL0M & SDAINL0AM) = H91 x W162 x D117mm
22kW (SDAINL1M) = H98 x W188 x D135mm
5.5 to 11kW (SDAINLM12 to SDAINLM22) = H68 x W158 x D125.2mm
15, 22 & 30kW (SDAINLM30 to SDAINLM55) = H85 x W158 x D147.3mm

Note

FLC figures quoted are maximum. The overload specified has been determined by applying the following formula: 0.58 x motor FLC.,Allow additional clearance dimensions for the wiring bar above and below the starter.,Thermal overload ZB12-16 is not currently stocked. The starters which use the X Start range of components are not compatible with DILM components.

//media.rs-online.com/t_line/L216755-02.gif
Specifications
Attribute Value
Power Rating 7.5 kW
Motor Starter Type Star Delta
Voltage Rating 110 V ac
IP Rating IP55
Phase 3
Motor Starter Functionality Automatic
Overall Length 68mm
Overall Width 158mm
Overall Depth 125.2mm
Series SDAINL
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 517.32
(exc. GST)
$ 569.05
(inc. GST)
units
Per unit
1 - 5
$517.32
6 +
$506.30
Related Products
Standard Control Units Ideal to satisfy the basic ...
Description:
Standard Control Units Ideal to satisfy the basic protection requirements for motor starters; thermal overload and short-circuit Protection against overloads and short-circuits Protection against phase failure and phase imbalance Protection against insulation breaks (equipment protection only)Manual reset Class 10 ...
Te Sys starter in box Unidirectional direct starter ...
Description:
Te Sys starter in box Unidirectional direct starter for motor control with 10 x 38mm fuseholder switch-disconnector to 11kWExcept ref. LE4K35 with14 x 51mm fuseholder switch-disconnector, unidirectional to 15kW.Attachment surface different compared to the old product (larger product).Box with switch-disconnector, ...
DO.L - Steel Enclosure IP55 sheet steel enclosed ...
Description:
DO.L - Steel Enclosure IP55 sheet steel enclosed starter complete with isolator for DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. AC-3 rated triple pole contactor with IP20 terminals and triple pole AC-3 rated switch ...
Star Delta - Steel Enclosure IP55 sheet steel ...
Description:
Star Delta - Steel Enclosure IP55 sheet steel (epoxy painted RAL 7032) enclosed starter complete with isolator for Star Delta applications to comply with IEE Regulations, 16th Edition on Isolation and Switching,AC-3 rated triple pole contactors with IP20 terminals and ...