Entrelec, 10-Pole Jumper Bar, BJD Series

  • RS Stock No. 454-801
  • Mfr. Part No. 1SNA178032R2500
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

Note

Not all types may be available

//media.rs-online.com/t_line/L454693-05.gif

Approvals

7777

Specifications
Attribute Value
Accessory Type 10-Pole Jumper Bar
Series BJD
For Use With Terminal Block
30 : Next working day (AU stock)
10 : 5 working days (Global stock)
Price (ex. GST) Each (In a Pack of 5)
$ 13.004
(exc. GST)
$ 14.304
(inc. GST)
units
Per unit
Per Pack*
5 +
$13.004
$65.02
*price indicative
Related Products
Requires a separator end section every 40cm approx ...
Description:
Requires a separator end section every 40cm approx and at DIN rail extremities. A 6mm dia. hole is required in the cover at each separator. Transparent PVC protective cover, 1m length in 2 sizes Snap-fits into place and secured with ...
Requires a separator end section every 40cm approx ...
Description:
Requires a separator end section every 40cm approx and at DIN rail extremities. A 6mm dia. hole is required in the cover at each separator. Transparent PVC protective cover, 1m length in 2 sizes Snap-fits into place and secured with ...
Ranges of power terminal blocks, fitted with 1 ...
Description:
Ranges of power terminal blocks, fitted with 1 or 2 covers, for DIN railA stopper, screw bridge bars and a branch for Faston 6.35 x 0.8mm tabs are available separately.Central hex socket connection screw, 6mm.M6 screw for direct fixing.
A range of screw clamp terminal blocks and ...
Description:
A range of screw clamp terminal blocks and accessories offering a 20% width reduction compared with the Entrelec 5000 series Designed to mount on ’top hat’ format DIN rails using a unique asymmetrical profile which aids visibility from any direction ...