Phoenix Contact STEP-PS/1AC/ 5DC/6.5 Switch Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 5V dc dc Output,

The new STEP POWER generation of compact power supply units is particularly suitable for installation distributors and flat control panels thanks to its design. Their high degree of efficiency and the low standby losses make for high power efficiency.

Easy mounting on the rail and wall
Maximum energy efficiency through small losses
Fast commissioning with LED function monitoring
High operational safety by long power failure under full load
Worldwide use by wide-range intake and international approval package
Wide temperature range from -25 ° C to +70 ° C
Parallel switched to increase performance and redundancy

The design of the PSUs makes them suitable for installation distributors and flat control panels. More specifically, these STEP POWER PSU's have been designed to cater for building automation applications.

DIN rail power supplies typically feature an easy install. With the ability to mount it onto a compatible DIN rail, all you usually have to do is slide it onto one. These STEP DIN rail power supply's support NS 35 (EN 60715) rails. Once you've slid your power supply onto your rail, it is then a case of connecting your cables into the relevant inputs and outputs. Wires must be stripped 6.5mm before inserting into the terminal blocks. The terminal blocks are an effortless screw connection, making your install simple.

Effectively, a DIN rail power supply is a power supply, that is designed to be put on a DIN rail. These power supplies cater to the industrial world, rather than consumer electronics. They feature different connection methods such as terminal block connections rather than your typical 3-pin socket power. DIN Rail PSU's are designed to sit inside cabinets and work hand-in-hand with providing higher efficiency for industrial applications.

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved

This DIN rail power supply by Phoenix Contact, with a compact design and efficient operation, is ideal for single-phase power supply applications. With an output voltage of 5V DC and efficiency over 80%, this industrial power supply ensures reliable performance for various automation and electronic systems.

• Efficient single-phase power supply suitable for DIN rail mounting
• Output voltage of 5V DC and maximum output current of 6.5A
• High MTBF of more than 500,000 hours for reliable power distribution
• Compact design allows for flexible mounting options
• Energy savings due to maximum efficiency and low idling losses
• Flexible input voltage range of 85V AC to 264V AC for versatile compatibility

• Ideal for building automation systems
• Suitable for distribution boards in industrial environments
• Used for powering electronic equipment in control cabinets
• Can be used for applications requiring reliable and efficient power supply

It is designed specifically for building automation, providing reliable power distribution.

Yes, it is suitable for use in control cabinets for powering various electronic devices.

Yes, it is designed for use with industrial distribution boards for seamless power distribution.