Phoenix Contact QUINT-PS/2AC/1DC/24DC/20 Switch Mode DIN Rail Power Supply, 360 → 575V ac ac, dc Input, 24V dc
- RS Stock No.:
- 168-2484
- Mfr. Part No.:
- 2320830
- Brand:
- Phoenix Contact
Discontinued product
- RS Stock No.:
- 168-2484
- Mfr. Part No.:
- 2320830
- Brand:
- Phoenix Contact
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
QUINT POWER Single and Three Phase Power Supplies
QUINT POWER generation maximizes the availability of your plant. With some featuring the SFB technology (Selective Fusebreaking Technology), the 6-times nominal current for 12 ms, can be the first time standard circuit breakers reliable and quick trigger. Faulty current paths are selectively shut down, the error is limited and important Plant parts remain in operation.
Features and benefits:
Selective Fusebreaking Technology (CRC Technology)
Worldwide use through wide-range input for DC and AC networks
Reliable start difficult loads with static power reserve POWER BOOST
High reliability through high MTBF> 500,000 h, long power failure bridging times > 20 ms, high voltage to 300 Vac
Preventive function monitoring DC-OK by professional signaling
Slim design
Conformal coating for extreme environments (Some models)
Worldwide use through wide-range input for DC and AC networks
Reliable start difficult loads with static power reserve POWER BOOST
High reliability through high MTBF> 500,000 h, long power failure bridging times > 20 ms, high voltage to 300 Vac
Preventive function monitoring DC-OK by professional signaling
Slim design
Conformal coating for extreme environments (Some models)
How do I wire a DIN rail power supply?
The QUINTPOWER power supply unit's feature terminal blocks on both the top & bottom of the unit. You'll need to strip 7mm length from your cable and insert it into the terminal blocks. A simple screw connection (M4 screw) will then lock your cable into the terminal block, providing an output or input connection. However, please follow all manafactuer installation instructions.
What are DIN-rail power supplies used for?
Typically these power supplies are mounted into cabinets and are used in industrial circumstances. They can be used for automation, machinery or any project that has modules that are mounted on DIN-rails.
Note
665-7766, 665-7769, 665-7794 and 665-7790 do not feature SFB technology
Approvals
UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved, CSA, CB, ABS
QUINT POWER power supply units – Superior system availability with SFB technology Compact power supply units of the new QUINT POWER generation maximize the availability of your system. With the SFB technology (Selective Fuse Breaking Technology), six times the nominal current for 12 ms, even the standard power circuit-breakers can now also be triggered reliably and quickly. Faulty current paths are switched off selectively, the fault is located and important system parts continue to operate. Comprehensive diagnostics are provided through constant monitoring of output voltage and current. This preventive function monitoring visualizes critical operating modes and reports them to the control unit before an error can occur.
Compact buffer solution
Fast tripping of standard circuit breakers
Preventive function monitoring
Reliable starting of difficult loads and easy system extension
Fast tripping of standard circuit breakers
Preventive function monitoring
Reliable starting of difficult loads and easy system extension
Specifications
Attribute | Value |
---|---|
Type | Switch Mode |
Output Voltage | 24V dc |
Output Current | 20A |
AC or DC Input Voltage | ac, dc |
AC or DC Output Voltage | dc |
Input Voltage | 360 → 575V ac |
Power Rating | 480W |
Electrical Phase | 2 |
Number of Outputs | 1 |
Height | 130mm |
Width | 120mm |
Depth | 130mm |
Series | QUINT-PS/2AC/1DC/24DC/20 |
Ripple And Noise | <50mV Pk-Pk |
Efficiency | >92% |
Minimum Temperature | -25°C |
Mounting Type | DIN Rail Mount |
Standards Met | CUL Listed, DIN VDE 0100-410, EN 50121-4, EN 50178/VDE 0160 (PELV), EN 60950-1/VDE 0805 (SELV), EN 61558-2-17, IEC 60068-2-27, IEC 60068-2-6, UL 508 Listed, UL 60950-1 Recognized |
Maximum Temperature | +70°C |
Output Voltage Adjustment Range | 18 → 29.5V |
MTBF | 860000h |