Schneider Electric DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 10A Output Current

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

ABL 8FEQ filtered, rectified power supplies

Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value.
These supplies are connected between phase and neutral or between two phases, filtered and rectified. They are designed for direct mounting on a DIN rail.

Standards

cULus, ENEC

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 207 → 253 V ac, 360 → 440 V ac
Output Voltage 24 V dc
Output Current 10 A
Power Rating 240W
Number of Outputs 1
Electrical Phase 1, 2
Type Linear
Height 153mm
Minimum Temperature -20°C
Depth 185mm
Ripple And Noise 1200mV
Maximum Temperature +60°C
Mounting Type DIN Rail Mount, Panel Mount
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 869.13
(exc. GST)
$ 956.04
(inc. GST)
units
Per unit
1 - 2
$869.13
3 - 4
$760.49
5 +
$684.44
Related Products
The new generation of Schneider Electric DIN Rail ...
Description:
The new generation of Schneider Electric DIN Rail Power supplies, specifically the ABL8 series, brings a new meaning to your automated systems The ingenuity of the ABL8 means you have greater control of your systems via the use of several ...
3-phase units SL10 & SL20 offer a choice ...
Description:
3-phase units SL10 & SL20 offer a choice of overload response In FUSE mode, in the event of an overload the unit switches off, in CONTINUOUS mode the unit will offer up to 80% more current at a reduced output ...
The power supplies in the TBD2 range are ...
Description:
The power supplies in the TBD2 range are designed for home automation applications, security systems and control cabinetsThey are also used for applications that require insulation class II.DIN rail or chassis mounting.Screw terminal connection.
Wide -range Input, 100 → 240 VacDC-OK Relay ...
Description:
Wide -range Input, 100 → 240 VacDC-OK Relay Contact Quick-connect Spring-clamp Terminals150% Peak Load Capability Full Power Between -25°C and +60°ATEX Approved