Mean Well, DRP DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 10A Output Current

  • RS Stock No. 282-568
  • Mfr. Part No. DRP-240-24
  • Manufacturer Mean Well
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Mean Well DRP Series Single Output Power Supply

A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W.

Features and Benefits

• Universal AC input/Full range • Protections: Short circuit/Overload/Over voltage/Over temperature
• Cooling by free air convection
• Can be installed on DIN Rail TS-35/7.5 or 15
• UL 508 (industrial control equipment) approved
• LED indicator for power-on
• 100% full load burn-in test
• Fix switching frequency at 100 kHz
• 3 years warranty
• Built-in active PFC function

Product Application Information

The units are suitable for powering security and building automation controls which are increasingly required in commercial and residential premises.

Why use a DIN Rail Power Supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC/DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids and relays.

Points to Consider When Buying a DIN Rail Power Supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection Types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Standards

UL508, TUV EN60950-1 approved

Mean Well DRP series 240 W, 24 V dc, 10 A DIN Rail power supply.

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 10 A
Power Rating 240W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 125.5mm
Maximum Temperature +70°C
Ripple And Noise 80mV Pk-Pk
Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
Series DRP
Minimum Temperature -10°C
Mounting Type DIN Rail Mount
Special Features Overvoltage and Short Circuit Protection
Load Regulation ±1%
MTBF 289.9kh
Output Voltage Adjustment Range 24 → 28V
Depth 100mm
30 : Next working day (AU stock)
227 : 5 working days (Global stock)
Price (ex. GST) Each
$ 302.25
(exc. GST)
$ 332.47
(inc. GST)
units
Per unit
1 +
$302.25
Related Products
Filtered, rectified power supplies are built using a ...
Description:
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitorsWith no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used ...
High-end power supplies must perform efficiently and reliably, ...
Description:
High-end power supplies must perform efficiently and reliably, even in challenging industrial environments This requires high power reserves, a long service life and optimal protection against overvoltage, vibration and extreme temperature conditions. New DCL technology gives PROtop an outstanding dynamic ...
Spring up terminal accepts wiring of ring terminalsSlim ...
Description:
Spring up terminal accepts wiring of ring terminalsSlim Size.Width: 22.5mm (10W/15W/30W), 36mm (60W/90W),46mm (120W),60mm (240W)Can be installed in six mounting directions.Optical mounting bracket is available for panel mounting.Five-Year Warranty.
Miniature size and lightweight Quick and easy mounting ...
Description:
Miniature size and lightweight Quick and easy mounting onto 35mm DIN-rail Spring clamp terminals72W and 100W meet PFC standard EN61000-3-2Adjustable output voltage Overload and short circuit protected Output LED indicator Suitable for use in harsh environment