Omron DIN Rail Panel Mount Power Supply, 5V dc Output Voltage, 60A output current

  • RS Stock No. 110-429
  • Mfr. Part No. S8VM-30005C
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

15W to 1500W S8VM Series with Downtime warning

The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose different types of voltage dip and loss which in turn can be wired into a PLC or management system to warn of impending problems.

Series Benefits.

Output voltages easily identified by colour coded labels on the side of the unit
Meets the latest European and relevant international standard
Operating temperature range 0°C to +50°C

Part Number S8VM-30005C

The S8VM Switch mode, Bottom-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM-30005C has a power rating of 300 W and an output voltage of 5 V dc plus a rated input voltage of 100 V ac to 240 V ac. This standard model incudes green output indicators plus has a fan providing forced air cooling.The power failure alarm notifies you of output voltage errors.

Bottom mounted power supplies can be front mounted using the correct mounting bracket for 300 w, 600 W and 1500 W models. Part number S8VM-30005C can be front mounted using a DIN Rail mounting bracket series S82Y-VM. Brackets are sold separately – see example stock number 818-6815.

Features and Benefits.

• Covered type power supply • Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• Green output indicators
• Forced air cooled – built in fan
• Power rating 300 W
• Output voltage 5 V dc
• Input voltage 100 V ac to 240 V ac
• Remote control function
• Parallel operation (up to 2 power supplies)
• Harmonic current emissions
• Efficiency 77% min.
• Frequency 50/60 Hz
• Rated output current 60 A
• Power failure alarm – Open collector, 30 V dc maximum (50 mA maximum)
• Electric shock finger protection
• RoHS compliant including Lead Free construction

What is a DIN Rail Mounted Power Supply?

A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety and Storage.

Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge. Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.

Note

Customer Warning.
The Safety standards will not apply if you replace the fan on this part number.

Standards

UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No.213, EN50178, EN60950-1, Harmonic current emissions E 61000-3-2

Specifications
Attribute Value
Output Voltage 5 V dc
Output Current 60 A
Power Rating 300W
Type Switch Mode
Width 62.5mm
MTBF 135000h
Depth 83.5mm
Load Regulation ±0.8%
Maximum Temperature +50°C
Ripple And Noise ±3.8%
Series S8VM
Minimum Temperature 0°C
Efficiency 77%
Discontinued product
Related Products
A range of single phase DIN Rail power ...
Description:
A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W. • Universal AC input/full range• Protections: Short circuit/Overload/Over voltage/Over temperature• Cooling by free air convection• ...
The TBLC series DIN Rail mounting power supplies ...
Description:
The TBLC series DIN Rail mounting power supplies are designed for industrial and residential applications. They are lower cost than the existing TBL range, with similar electrical specifications. Also, they fully comply to the new standby power and efficiency requirements ...
The mini power supply devices designed into the ...
Description:
The mini power supply devices designed into the LOGO!8 module offer great performance in the smallest space: The excellent efficiency over the complete load range and the low performance loss during idle times guarantee efficient operation. The power supply has ...
The HDR series PSU is an economical and ...
Description:
The HDR series PSU is an economical and ultra slim power supply which can be adapted to be installed on TS-35/7.5 or TS-35/15 DIN Rails. The body has a narrow width which allows for space saving within a cabinet. The ...