Schneider Electric Linear DIN Rail Power Supply, 207 → 253V ac ac Input, 24V dc dc Output, 4A Output, 96W
- RS Stock No.:
- 482-613
- Mfr. Part No.:
- ABL8FEQ24040
- Brand:
- Schneider Electric
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 482-613
- Mfr. Part No.:
- ABL8FEQ24040
- Brand:
- Schneider Electric
Legislation and Compliance
Product Details
ABL 8FEQ filtered, rectified power supplies
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value.
These supplies are connected between phase and neutral or between two phases, filtered and rectified. They are designed for direct mounting on a DIN rail.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value.
These supplies are connected between phase and neutral or between two phases, filtered and rectified. They are designed for direct mounting on a DIN rail.
Standards
cULus, ENEC
Specifications
Attribute | Value |
|---|---|
| Type | Linear |
| Output Voltage | 24V dc |
| Output Current | 4A |
| AC or DC Input Voltage | ac |
| AC or DC Output Voltage | dc |
| Input Voltage | 207 → 253V ac |
| Power Rating | 96W |
| Electrical Phase | 1, 2 |
| Number of Outputs | 1 |
| Height | 108mm |
| Depth | 165mm |
| Mounting Type | DIN Rail Mount |
| Ripple And Noise | 1200mV |
| Minimum Temperature | -20°C |
| Maximum Temperature | +60°C |