MCP41HV51-503E/ST, Digital Potentiometer 50kΩ 256-Position Serial-SPI 14-Pin TSSOP

  • RS Stock No. 799-0256
  • Mfr. Part No. MCP41HV51-503E/ST
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP45HVx1 Digital Potentiometers

The MCP45HVx1 family of devices from Microchip are Digital Potentiometers with an SPI Interface and on board Volatile Memory. The device family has dual power rails, one analogue one digital. The Analogue power rail can handle up to +36 V and can be implemented as a dual rail (±18 V) relative to the digital logic ground.

The MCP45HVx1 has a Write Latch (WLAT) function that inhibits the volatile wiper register from being updated (latched) with received data until the WLAT pin is low. This allows the specification of a condition where the volatile wiper register is updated (such as zero crossing).

Features

High-Voltage Analogue Support: +36 V terminal voltage range (DGND = V-), ±18 V terminal voltage range (DGND = V- +18 V)
Wide Operating Voltage: Analogue 10 V to 36 V, Digital 2.7 V to 5.5 V or 1.8 V to 5.5 V (DGND ≤ V- +0.9 V)
Single Resistor Network
Resistor Network Resolution: 7-bit: 127 resistors (128 Taps) or 8-bit: 255 resistors (256 Taps) – model dependant
High Terminal/Wiper Current (IW) Support: 25 mA for 5 kΩ, 12.5 mA for 10 kΩ and 6.5 mA for 50 kΩ and 100 kΩ
Zero-Scale to Full-Scale Wiper Operation
Low Wiper Resistance: 75 Ω (typical)
Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)
SPI Serial Interface
Resistor Network Terminal Disconnect via Shutdown pin (SHDN) or Terminal Control (TCON) register
Write Latch (WLAT) Pin to Control Update of Volatile Wiper Register (such as Zero Crossing)
Power-on Reset/Brown-out Reset for Digital and Analogue Supply
Serial Interface Inactive Current (3 μA Typical)
500 kHz Typical Bandwidth (-3 dB) Operation (5.0 kΩ Device)

Digital Potentiometer - Microchip

Specifications
Attribute Value
Control Interface Serial-SPI
Resistance Value 50kΩ
Number of Positions 256
Memory Type Volatile
Number of Pots per Package 1
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 14
Power Supply Type Dual, Single
Typical Single Supply Voltage 36 V
Typical Dual Supply Voltage ±18V
Dimensions 5.1 x 4.5 x 1.05mm
Height 1.05mm
Maximum Operating Temperature +125 °C
Width 4.5mm
Length 5.1mm
Minimum Operating Temperature -40 °C
On back order for despatch 03/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Pack of 4)
$ 2.37
(exc. GST)
$ 2.61
(inc. GST)
units
Per unit
Per Pack*
4 - 16
$2.37
$9.48
20 - 36
$2.35
$9.40
40 - 96
$2.09
$8.36
100 +
$1.955
$7.82
*price indicative
Packaging Options:
Related Products
MCP414x/416x/424x/426x Digital Potentiometers The Microchip MCP413x, MCP415x, MCP423x ...
Description:
MCP414x/416x/424x/426x Digital Potentiometers The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memoryFeatured is Wiper Lock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command ...
MCP444x/446x Digital Potentiometers The MCP444x/446x series of devices ...
Description:
MCP444x/446x Digital Potentiometers The MCP444x/446x series of devices from Microchip are Digital Potentiometers with non-volatile memory that are programmed via an I2C interface These Digital POTs include Microchip’s Wiper Lock™ Technology which allows the wiper setting to be locked in ...
The MCP41/426X devices are non-volatile, 8-bit (257 wiper ...
Description:
The MCP41/426X devices are non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an SPI compatible interface The MCP41/42XX family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer Wiper Lock™ Technology which ...
MCP414x/416x/424x/426x Digital Potentiometers The Microchip MCP413x, MCP415x, MCP423x ...
Description:
MCP414x/416x/424x/426x Digital Potentiometers The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memoryFeatured is Wiper Lock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command ...