Energy Harvesting Generator Wireless Switch Generator for use with Wireless Snap and Rocker Switches

  • RS Stock No. 894-8981
  • Mfr. Part No. AFIM-1001
  • Manufacturer ZF
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Energy Harvesting RF Generator Plug and Play

The Cherry Energy Harvesting Generator turns mechanical vibration into electrical energy. When actuated, a mechanical force acts vertically on the end of the generator’s lever. A patented mechanism then converts the mechanical energy generated into electrical energy in the form of a voltage pulse. Please note that this product must be used in conjunction with suitable RF electronics. This Energy Harvesting Generator is integral to Cherry's rocker and snap switches (Rocker – Stock no 8736671 & Snap – Stock no 8736675).
The Cherry AFIM-1001 offers a Plug and Play functionality the RF generator is mounted on a board and comes complete with built in RF electronics, ZF protocol wire, antenna and is configured for 868MHz. Ideally suited for easy design in of the RF generator.

Small size, with high energy efficiency
Long mechanical life.

Note

Energy Harvesting
In our connected world, there is strong demand for easy and flexible data transmission, preferably with low energy consumption. Cherry's innovative wireless and battery-less Energy Harvesting Generator is effective in a variety of environments and functions. Energy harvesting can be found in diverse market sectors, including industrial and building automation, smart home and medical. Cherry's technology offers an excellent wireless alternative to wired or battery-powered equipment. Compatible with multiple protocols (product dependant), the products are suitable for global use. As there is no need to change or dispose of batteries, the solution is both environmentally friendly and low maintenance.

Specifications
Attribute Value
Accessory Type Wireless Switch Generator
For Use With Wireless Snap and Rocker Switches
28 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 39.11
(exc. GST)
$ 43.02
(inc. GST)
units
Per unit
1 - 4
$39.11
5 - 9
$38.06
10 - 24
$37.57
25 - 49
$36.77
50 +
$35.85
Related Products
The Pmod DHB1 uses the Texas Instruments® DRV8833 ...
Description:
The Pmod DHB1 uses the Texas Instruments® DRV8833 dual H-Bridge motor driver chip to drive two DC motors or a single stepper motor. Each H-Bridge can be driven by GPIO signals. Dual H-Bridge capable of 1.5A RMSTwo quadrature encoder channels ...
The Pmod DA4 is an 8 channel 12-bit ...
Description:
The Pmod DA4 is an 8 channel 12-bit Digital-to-analogue Converter run via the analogue Devices AD5628.By communicating with the device through SPI, users may send different analogue values on individual channels or output to all 8 channels simultaneously. Eight channel, ...
The Pmod RF2 adds RF communication through the ...
Description:
The Pmod RF2 adds RF communication through the Microchip® MRF24J40 IEEE 802.15.4™ 2.4GHz RF transceiver module. By communicating with the device through SPI, users can transmit data at speeds up to 625 kbps through the ZigBee®, MiWi™, and MiWi P2P ...
The Digilent Pmod I2S2 features a Cirrus CS5343 ...
Description:
The Digilent Pmod I2S2 features a Cirrus CS5343 Multi-Bit Audio A/D Converter and a Cirrus CS4344 Stereo D/A Converter, each connected to 3.5mm Audio Jacks. These circuits allow a system board to transmit and receive stereo audio signals via the ...