Phoenix Contact SUBCON-PLUS Series 9 Way Straight Female Screw Terminal D-sub Connector

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

SUBCON-PLUS-CAN – 2744694

A straight D-SUB connector from Phoenix Contact. The 9 way connector is part of the SUBCON-PLUS series and has a termination resistor that can be connected/ switched on through the slide switch. This female, D-SUB connection is suitable for wire size 18 – 26 AWG.

Features and Benefits

• Female, screw terminal
• Metal plated ABS housing
• Cable mounting type
• Operating temperature of -20°C to +75°C

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specifications
Attribute Value
Number of Contacts 9
Gender Female
Body Orientation Straight
Mounting Type Cable Mount
Termination Method Screw Terminal
Current Rating 100.0mA
Housing Material Metal Plated ABS
Voltage Rating 50 V
Length 60.0mm
Width 44.0mm
Depth 16.0mm
Dimensions 60 x 44 x 16mm
Minimum Operating Temperature -20.0°C
Maximum Operating Temperature +75°C
Series SUBCON-PLUS-CAN
6 : Next working day (AU stock)
25 : 5 working days (Global stock)
Price (ex. GST) Each
$ 76.02
(exc. GST)
$ 83.62
(inc. GST)
units
Per unit
1 - 24
$76.02
25 - 74
$69.95
75 - 199
$68.55
200 - 399
$67.18
400 +
$65.84
Related Products
Shrunk Delta Ribbon (SDR) Connectors These 3M 122 ...
Description:
Shrunk Delta Ribbon (SDR) Connectors These 3M 122 Series Shrunk D Ribbon (SDR) Boardmount Shielded Receptacles have a low profile 08 mm pitch. The design of these 122 Series Shrunk D Ribbon (SDR) Boardmount Shielded Receptacles includes provision for M2 ...
Single Piece Hoods with Jackscrews A range of ...
Description:
Single Piece Hoods with Jackscrews A range of MHDPPK SLIM Series Polyamide Hoods available in various colours suitable for any common Sub-D connectors as well as other types of ’D’ connector Features and Benefits Hinged one piece plastic construction Snap ...
HAN® M12 Crimp Contacts HAN® M12 Crimp Contacts ...
Description:
HAN® M12 Crimp Contacts HAN® M12 Crimp Contacts for use with HAN® M12 Crimp Connectors see stock number 707-3780 typical Precision turned crimp contacts available in various wire capacity sizes to cover most situations. Turned crimp contacts Performance Level 1 ...
RS Firewire Feedthrough Connectors In XLR Shell A ...
Description:
RS Firewire Feedthrough Connectors In XLR Shell A range or RS Pro metal Firewire IEEE 1394 feedthrough connectors The Firewire connectors are housed in robust nickel plated zinc XLR shells with universal 23.6 mm diameter cut outs. The metal feedthrough ...