Keysight Technologies N2893A Current Probe & Clamp

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Keysight Technologies Current Probe & Clamp

The Keysight Technologies 100MHz bandwidth, active current probe for InfiniiVision and Infiniium oscilloscopes. The probe features flat bandwidth (DC-100MHz), low noise (<2.5 mA RMS) and low circuit insertion loss. Auto demagnetization (degauss) and calibration removes any residual magnetism and unwanted DC offset in the probe. The probe is directly powered by the InfiniiVision and Infiniium Autoprobe interface, eliminating the need for an additional power supply. It is ideal for capturing transient current signals such as those found in motor controllers, switching power supplies, inverters, and current amplifiers driving inductive loads.

Features and Benefits

Wide bandwidth from DC to 100MHz
High S/N ratio
Low current measurement capability
15A peak, 15ADC, 10Arms continuous, 30A peak non-continuous current
Easy protect function at excessive input

Applications

For use with 80000/90000 series
Use N278xA current probe with N2779A power supply
E2697A high impedance adapter
For use with 90000 X-series
Use the N5449A high impedance probe adapter

Certifications

CAT I 300V
CAT I

Specifications
Attribute Value
Current 15A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 100000kHz
Safety Category CAT I 300 V
Safety Category Level CAT I
Model Number p N2893A
Best Accuracy ±1% + 1 mV
Safety Category Voltage 300V
Bandwidth DC to 100 MHz
Temporarily out of stock - back order for despatch 12/11/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 7,730.82
(exc. GST)
$ 8,503.90
(inc. GST)
units
Per unit
1 +
$7,730.82
Related Products
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically ...
Description:
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically designed for use with oscilloscopes Clamp makes it possible to monitor current waveforms directly and without breaking a connection Note This product requires a PP3 battery for operation (stock number 450-3092) Current ...
i3000s Flex-36 standard pliers, 915 mm Standard AC ...
Description:
i3000s Flex-36 standard pliers, 915 mm Standard AC current pliers Inspired by the principle of the Rogowski coilCan measure intensity up to 3000 A when used with oscilloscopes and recorders.Its flexible measurement head is light and can be easily and ...
The Tektronix ’long nose’ style clamp-on probe uses ...
Description:
The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used ...
Chauvin Arnoux MN60 Mini Clamps Dual range ac. ...
Description:
Chauvin Arnoux MN60 Mini Clamps Dual range ac. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k Hz bandwidth Ergonomic jaw design for measurement where access is difficult and ...