Teledyne LeCroy CP500 Current Probe & Clamp

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): JP
Product Details

Teledyne LeCroy Current Probe & Clamp

The Teledyne LeCroy 6m current probe is a state of the art device created for easy, highly accurate current measurements. The compact probes offer wide bandwidth with over-current protection and utilize a combination of Hall Effect and transformer technology that enables you to take measurements on DC, AC, and impulse currents. It also has a 2MHz bandwidth and is designed to measure continuous currents up to 500Amp.
Note:
The CP030 (801-4858 ) and CP031 (724-0911 ) are compatible with LeCroy X-stream oscilloscopes running firmware version 4.3.1.1 or greater. Their minimum sensitivity is 10mA/div compared with 1mA/div for CPO30A (878-7604 ) and CPO31A (878-7607 ). The maximum conductor size for these four models is 5mm OD. CP150 (801-4855 ) and CP500 (724-0918 ) have minimum sensitivity 100mA/div and maximum conductor size 20mm OD. Teledyne LeCroy current probes have a small form factor which makes probing easier on a crowded compact board.

Features and Benefits

ProBus active probe interface with automatic scaling in A/div
Autozero and degauss capabilities built-into instrument’s user interface
700 Apeak current
30 Arms continuous current
2MHz bandwidth
100mA/div sensitivity
Compatible with the DSC015

Applications

Switching power supplies
Motor drives
Electric vehicles
Uninterruptible power supplies

Certifications

CAT II 600V
CAT III 300V
CAT II
CAT III

Specifications
Attribute Value
Current 500A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 2000kHz
Maximum Conductor Size 20mm
Safety Category CAT II 600 V, CAT III 300 V
Safety Category Level CAT II, CAT III
Model Number p CP-500
Best Accuracy ±1% + 10 mA
Safety Category Voltage 300 V, 600 V
Bandwidth DC to 2 MHz
3 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 7,050.00
(exc. GST)
$ 7,755.00
(inc. GST)
units
Per unit
1 +
$7,050.00
Related Products
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically ...
Description:
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically designed for use with oscilloscopes Clamp makes it possible to monitor current waveforms directly and without breaking a connection Note This product requires a PP3 battery for operation (stock number 450-3092) Current ...
i3000s Flex-36 standard pliers, 915 mm Standard AC ...
Description:
i3000s Flex-36 standard pliers, 915 mm Standard AC current pliers Inspired by the principle of the Rogowski coilCan measure intensity up to 3000 A when used with oscilloscopes and recorders.Its flexible measurement head is light and can be easily and ...
5 different probes covering a wide range of ...
Description:
5 different probes covering a wide range of applicationsMaximum current measurement coverage up to 6000 Amps.Maximum voltage insulation up to 10 kV peak.Connect to a wall plug or use with batteries.Low loading of the circuit under test.Wide coil operating temperature ...
Chauvin Arnoux MN60 Mini Clamps Dual range ac. ...
Description:
Chauvin Arnoux MN60 Mini Clamps Dual range ac. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k Hz bandwidth Ergonomic jaw design for measurement where access is difficult and ...