Fluke I200S Current Probe & Clamp

  • RS Stock No. 122-4790
  • Mfr. Part No. I200S
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Fluke i200 and i200s AC Current Probe and Clamp

The i200 is a single range 200 A ac current clamp with current output via banana plugs. The i200 is compatible with all Fluke multimeters or any other current measurement device that accepts banana plugs.

The i200s is a dual range 20 A and 200 A ac current clamp with voltage output via a BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

Shared features

Maximum current: 240 A AC
Useable frequency: 40 Hz → 10 KHz
Clamp opens to 21 mm
Maximum conductor Ø: 20 mm or 20 x 5 mm busbar

i200

Measurement Range: 0.5 → 240 A
Output Signal: 1 mA/A
Safety shrouded banana plugs allow use with most multimeters

i200s

Measurement Range: 0.1 → 24 A and 0.5 → 240 A
Output Signal: 100 mV/A in the 20 A range and 10 mV/A in the 200 A range
Supplied with a BNC connector for use with oscilloscopes, ScopeMeters® and testing devices with a BNC input
Banana / BNC adapter for use with a multimeter

Standards

EN61010, CAT III 600 V

Fluke AC Current Clamp

The Fluke AC current clamp has a dual current rating of 0.1A to 24A and 0.5A to 240A with voltage output via a BNC connector. A dual banana to BNC adapter is supplied to allow the clamp to be connected to multimeters with banana inputs.

Features and Benefits

• Useable frequency is 40Hz to10KHz
• Clamp opens to 21mm
• Maximum conductor size is 20mm
• Output signal is 100mV/A in the 20A range and 10mV/A in the 200A range
• Included adapter for DMM's
• Take accurate current readings without breaking the circuit
• Supplied with a BNC connector for use with oscilloscopes, ScopeMeters and testing devices with a BNC input

Applications

• Inverters
• Switch mode power supplies industrial controllers
• Automotive leakage currents
• Applications requiring accurate isolated current measurement
• Waveform analysis

Certifications

• EN61010
• CAT III 600 V

Specifications
Attribute Value
Current 240A
Probe Type AC
Minimum Bandwidth 40Hz
Maximum Bandwidth 10kHz
Maximum Conductor Size 20mm
Safety Category CAT III 600 V
Safety Category Level CAT III
Model Number p I200S
Best Accuracy ≤1.5 + 0.5 A (200 A Range) %, ≤2 + 0.5 A (20 A Range) %
Safety Category Voltage 600V
Bandwidth 10 (-1.5 dB) kHz, 40 (-3 dB) kHz
2 In stock for delivery within 1 working day(s)
Price (ex. GST) Each
$ 448.00
(exc. GST)
$ 492.80
(inc. GST)
units
Per unit
1 +
$448.00
Related Products
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically ...
Description:
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically designed for use with oscilloscopes Clamp makes it possible to monitor current waveforms directly and without breaking a connection Note This product requires a PP3 battery for operation (stock number 450-3092) Current ...
CT series current probe Approximate tolerance ±3% High ...
Description:
CT series current probe Approximate tolerance ±3% High Bandwidth Ultra-low inductance Rise times: 350 p Sec (CT1), 500 p Sec (CT2), 200 p Sec (CT3)Magnetic inductance: 6 μH (CT1), 7 μH (CT2), 1 μH (CT3)UL3111-2-032, CSA10102.032, EN61010-2-032, IEC61010-2-032 compliant. The ...
5 different probes covering a wide range of ...
Description:
5 different probes covering a wide range of applicationsMaximum current measurement coverage up to 6000 Amps.Maximum voltage insulation up to 10 kV peak.Connect to a wall plug or use with batteries.Low loading of the circuit under test.Wide coil operating temperature ...
Chauvin Arnoux MN60 Mini Clamps Dual range ac. ...
Description:
Chauvin Arnoux MN60 Mini Clamps Dual range ac. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k Hz bandwidth Ergonomic jaw design for measurement where access is difficult and ...