Druck UNO-38016-3275 Current Loop Calibrator Case, For Use With UPS III Loop Calibrator

  • RS Stock No. 434-7022
  • Mfr. Part No. UNO-38016-3275
  • Manufacturer Druck
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Druck Loop Calibrator - UPS III

Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers a wealth of time-saving features, all made possible through the advanced microprocessor-based electronics and large menu-driven graphics display.

Features & Benefits

• HART compatible with internal loop resistor
• Weighing just 275g (9.7 oz), and it's dimensional measurements are L129 x W77 x D24 mm - fitting comfortably in a shirt pocket
• Rugged, hardwearing and compact design
• The graphic display with a menu-driven interface has been designed to be super user-friendly
• The internal 0 to 24 V (volts) loop supply is available in both measure and source modes, this is essential during plant shutdowns
• Step, span check and value check can be easily carried out through linearity tests and zero/span adjustments
• The calibrator offers single-handed loop testing, valve set-up and slow rate checks through adjustable rates (1-599 secs)
• The continuity and switch test facility reduce DMM dependence when fault finding, checking loop integrity and testing switches
• Adjustable display contrast and resolution
• Battery voltage and low battery indicator
• The primary reading is shown in mA (milliamp) or %, as linear or square root (flow)
• Auto switch off can be enabled or disabled, when the auto power down is enabled it will power down 30 minutes ager the last key was pressed
• The measurement generation of 0 - 24mA DC
• Predefined values for quick testing of linear loops, flow loops and the control of valves
• Has an operating temperature of 14°F to 122°F (-10°C to 50°C)
• The power supply of this loop calibrator is through 4 x 1.5 V (volts) AA size alkaline batteries
• Electrical terminals are gold plated, 4 mm sockets

Looking for some accessories?

• A universal mains input adapter as an alternative power for the UPS III – 434-7038
• Carry case – 434-7022
• Protective nitrile rubber over-boot, ensuring an extra layer of protection for the device – 434-7016

What's included with the kit?

• A handy user manual
• Set of cables/wires
• Batteries - 4 x 1.5 V AA alkaline
• Calibration certificate as standard

Specifications
Attribute Value
Accessory Type Case
For Use With UPS III Loop Calibrator
4 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 100.65
(exc. GST)
$ 110.71
(inc. GST)
units
Per unit
1 +
$100.65
Related Products
Fluke 789 Process Meter™ Fluke's 789 combined multimeter ...
Description:
Fluke 789 Process Meter™ Fluke's 789 combined multimeter and current loop calibrator features double troubleshooting capabilities, a mA loop calibrator and safety rated digital multimeter have been combined into one compact tool for easy measurement Wireless monitoring is made easy ...
Fluke 707Ex Intrinsically Safe mA Loop Calibrator Extremely ...
Description:
Fluke 707Ex Intrinsically Safe mA Loop Calibrator Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator which is an intrinsically safe instrument for use in potentially explosive environments Designed for high performance one handed ...
Chauvin Arnoux Calibrators CA1621, CA1623 & CA1631 These ...
Description:
Chauvin Arnoux Calibrators CA1621, CA1623 & CA1631 These compact, robust, easy-to-handle calibrators have large LCD screens and are suitable for use in highly diverse on-site conditions They can calibrate an instrument in its operating environment and without removing it from ...
CALYS 50 calibrator Maintenance tool which gathers all ...
Description:
CALYS 50 calibrator Maintenance tool which gathers all of the signals in the manufacturing process: voltage, current, resistance, temperature using resistance probes and thermocouples, Frequency, counting and measurement and simulation of dry contactsSimultaneous measurement and emission.Double display ...