RS PRO Crimp Die Set, Terminal

  • RS Stock No. 624-1336
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Hydraulic Crimper

This robust hydraulic crimping tool is compact and ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can be advanced using only one hand, therefore leaving the other hand free to position the connector. All models are highly reliable and excellent quality.

Features and Benefits:

• 180° rotational head
• Supplied with Die Sets
• Built-in safety valve
• Pressure release lever
• Housed in a moulded plastic carry case
• Comprehensive instructions included
• Cable Range: 25-185mm
• Crimping Force: 50kN
• Rated Operating Pressure: 600 bar (8600 psi)

What do you get?

• RS Pro Hydraulic Crimp Tool
• Die Set: 6 mm², 10 mm², 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm² and 185 mm²
• Plastic Case

RS PRO Die Sets Available Separately

• RS Stock no: 624-1358, 624-1308, 624-1336, 624-1320

Typical Applications

• Maintenance and repair
• Electrical Installations
• Cable assemblies

FAQ:
How easy are they to use?

Although this kit may look intimidating at first glance, it’s fairly simple to use. During application prepare the cable and slide on the connector, select and insert the required die, insert the cable and connector. Holding the cable in position with one hand, prime the handle until the crimp tool starts to bite, once you feel resistance you can use both hands to increase the pressure and complete the union.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Note

Compatible with RS tube terminals typically stock no. 119-160

Specifications
Attribute Value
Crimp Connector Type Terminal
Minimum Wire Size mm² 95mm²
Maximum Wire Size mm² 120mm²
Terminal Insulation Uninsulated
15 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 59.98
(exc. GST)
$ 65.98
(inc. GST)
units
Per unit
1 - 4
$59.98
5 - 24
$58.93
25 - 74
$56.76
75 - 149
$55.61
150 +
$54.62
Related Products
RS Universal Crimp Frame All RS crimp tools ...
Description:
RS Universal Crimp Frame All RS crimp tools are compatible with the RS range of red, yellow, and blue terminals Features and Benefits • Load setting• Heat treated frame components• Black oxide finish• Full cycle ratchet controlled release• Red molded ...
Universal Frame Die Sets High quality die sets ...
Description:
Universal Frame Die Sets High quality die sets for use with the universal crimp tool frame stock no 848-391. The die sets are identified with the appropriate cable group in the price table. The &146;Cable Group to Cable Type Relationship&146; ...
TE Connectivity SDE (Standard Die Envelope) Die Assemblies ...
Description:
TE Connectivity SDE (Standard Die Envelope) Die Assemblies SDE die assemblies for use with commercial grade SDE (Standard Die Envelope) PRO-CRIMPER III crimping tool (stock number 849-114) and the SDE-SA commercial grade hand crimp tool (stock number 448-7883)These crimp dies ...
RS Die Sets for Heavy Duty Hand Crimp ...
Description:
RS Die Sets for Heavy Duty Hand Crimp Tool Die sets for use with heavy duty hand crimp tool stock no 241-4710Stock number 241-4726 is a crimp die for terminal sizes 6mm2, 10mm2, 70mm2 and 95mm2Stock number 241-4732 is a ...