JAE Ratchet Crimping Tool for Crimp Contact

  • RS Stock No. 372-2135
  • Mfr. Part No. M22520/1-01
  • Manufacturer JAE
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

JAE Ratchet Crimp Tool

A quality hand crimp tool for crimping circular connector contacts. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps. An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits

• Lightweight
• Wire size: 12-26 AWG
• 8-step selector knob for crimp depth selection
• Ratchet mechanism
• Interchangeable positioner compatible


• Positioners are not supplied with the tool and must be purchased separately.

Typical Applications:

• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

How easy are they to use?

They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.

How do you maintain the product?

• There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Attribute Value
Crimp Tool Type Ratchet
Crimp Connector Type Crimp Contact
Wire Size AWG 26 → 12AWG
On back order for despatch 16/01/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 893.23
(exc. GST)
$ 982.55
(inc. GST)
Per unit
1 - 2
3 +
Related Products
C Frame hand operated crimp tools with a ...
C Frame hand operated crimp tools with a double action jaw closure designed for service and repair These C Frame hand crimp tools feature a ratchet mechanism which stays locked until the handles of the tool are fully closed and ...
The multi-contact is an MES-CZ series, locator adjustable ...
The multi-contact is an MES-CZ series, locator adjustable crimp tool It is suitable for crimping from 0.14 to 4mm² cables with 1mm, 1.5mm, and 3mm with Combi Tac contacts. The wire size of tool ranges between 26AWG and 22 AWG. ...
50 Ω characteristic impedance One-touch (push / pull) ...
50 Ω characteristic impedance One-touch (push / pull) lock provides speedy insertion / removal Variety of colours provided to prevent incorrect wiring Crimping used for wire connections, improving economy and onsite workability
Cinch's Modular Integrated Connector Enclosures offer high quality ...
Cinch's Modular Integrated Connector Enclosures offer high quality sealed packaging solutions for rugged electronic control module applications,The ModICE product line consists of two distinct enclosure sizes and 6 header configurations allowing 18, 30, 48 and 60 I/O mating to Cinch's ...