Daniels Manufacturing M22520/7-01 Ratchet Crimping Tool for Crimp Contact, 20AWG

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

MH860 Adjustable Hand Crimp Tool

From Daniels Manufacturing, the MH860 Intermediate Adjustable Hand Crimp Tool is designed for wire barrel sizes 16 to 22 (16 to 28awg). Light-weight and easy to use, the MH860 Hand Crimp Tool features a double ratchet action that ensures accurate crimping across multiple uses. The MH860 can use interchangeable positioners for high precision applications.

Features & Benefits

Lightweight
Double Ratchet Action
Interchangeable Positioners

Product Application Information

Highly versatile, the MH860 hand crimp tool is suitable for use with various crimp contact connectors.

Typical Applications:

• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

FAQ:
How easy are they to use?
They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?
• There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Series M22520/7-01
Crimp Connector Type Crimp Contact
Crimp Tool Type Ratchet
Overall Length 190.5mm
38 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 869.43
(exc. GST)
$ 956.37
(inc. GST)
units
Per unit
1 +
$869.43
Related Products
Low cost and high performance stamped contacts feature ...
Description:
Low cost and high performance stamped contacts feature insulation support for increased holding power.Contact range: 24-28 awg (stamped) and 20-26 awg (machined).Contacts are commercial quality in both stamped and screw machine & are compatible with industry tooling.Hand tools for both ...
K 301/6 K self-setting crimping tool for cable ...
Description:
K 301/6 K self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.14 - 10 mm². Very light and ergonomicCharacteristicsOne crimping profile for all cross-sections due to automatic cross-section adjustmentWith ratchet for consistently-controlled crimp resultsLateral insertion (side ...
A semi-–professional ratchet hand tool for crimping shielded ...
Description:
A semi-–professional ratchet hand tool for crimping shielded and unshielded modular data plugs. The parallel action tool with ratchet release mechanism enables the tool to be easily opened to remove obstructions when an improper crimp occurs. A range of interchangeable ...
Crimp lever tool for single-handed operationFor crimping uninsulated ...
Description:
Crimp lever tool for single-handed operationFor crimping uninsulated connectors for 2.8 and 4.8 mm plug widthsConsistently high crimp quality thanks to precision profile and fine-stage automatic lock (unlockable with tool)Calibrated crimp pressureCapacity: 0.1 → 2.5 mm², AWG 27 → 13Length: ...